Does any one know if it is possible to create a 2" ramp-in in order to pocket screw? If so, how?
Thanks in advance!
-John
Is it possible to pocket drill in Ecab
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Guru Member
- Posts: 645
- Joined: Mon, Nov 20 2006, 3:39PM
- Company Name: Rylex Custom Cabinetry-Close
- Country: UNITED STATES
- Location: Pine Island, New York
- Contact:
-
- Guru Member
- Posts: 645
- Joined: Mon, Nov 20 2006, 3:39PM
- Company Name: Rylex Custom Cabinetry-Close
- Country: UNITED STATES
- Location: Pine Island, New York
- Contact:
Re: Is it possible to pocket drill in Ecab
Should I take the sound of crickets as a no...? I realize that this can be done through the g-code but was looking for an Ecab way.
-John
-John
-
- Thermwood Team
- Posts: 1740
- Joined: Tue, May 17 2005, 12:44PM
- Company Name: Thermwood Corporation
- Location: Thermwood Corp: Dale, Indiana
- Contact:
Re: Is it possible to pocket drill in Ecab
John,
Sorry for the sound of crickets... No, there is not a direct way via eCabSys to do this.
Sorry for the sound of crickets... No, there is not a direct way via eCabSys to do this.
Regards,
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
-
- Guru Member
- Posts: 645
- Joined: Mon, Nov 20 2006, 3:39PM
- Company Name: Rylex Custom Cabinetry-Close
- Country: UNITED STATES
- Location: Pine Island, New York
- Contact:
Re: Is it possible to pocket drill in Ecab
No worries Scott!
-
- Guru Member
- Posts: 256
- Joined: Sat, Apr 04 2009, 6:27PM
- Company Name: ShopBot Tools Inc
- Country: UNITED STATES
- Location: Durham NC
Re: Is it possible to pocket drill in Ecab
John...
I use a rectanglar rafix pattern for screw pockets. Works great, but doesnt have the sloped bottom.
I use a rectanglar rafix pattern for screw pockets. Works great, but doesnt have the sloped bottom.
Gary Campbell
ShopBot Tools Production Support
ShopBot (eCabinets) Link Training & Support
ShopBot Tools Production Support
ShopBot (eCabinets) Link Training & Support