edge band editor
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- eCabinets Beta Tester
- Posts: 933
- Joined: Tue, May 17 2005, 2:48PM
- Location: Logansport, In
- Contact:
edge band editor
I am in the drawer box editor and have made a melamine drawer box, when I try to take it to the edge band editor I get a error saying,"This cabinet does not have enough data to edge band its parts"
I have regenerated it, closed e-cabs and restarted, etc..
Never seen this one, any help?????
I have regenerated it, closed e-cabs and restarted, etc..
Never seen this one, any help?????
Mike Murray
Versatile Cabinet & Solid Surface
mike@versatilecabinet.com
http://www.versatilecabinet.com
Versatile Cabinet & Solid Surface
mike@versatilecabinet.com
http://www.versatilecabinet.com
-
- Guru Member
- Posts: 477
- Joined: Tue, May 17 2005, 1:55PM
Re: edge band editor
I could be wrong but I don't think that drawer boxes are supported in the edge banding. Somebody please tell me I'm wrong. LOL.
-
- Wizard Member
- Posts: 4722
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: edge band editor
Mike,
In the Drawer box Editor double click your drawer box to select it then right click and choose Remove Part Editor cuts from entire drawer box.
Kerry
In the Drawer box Editor double click your drawer box to select it then right click and choose Remove Part Editor cuts from entire drawer box.
Kerry
-
- eCabinets Beta Tester
- Posts: 933
- Joined: Tue, May 17 2005, 2:48PM
- Location: Logansport, In
- Contact:
Re: edge band editor
Thanks Kerry, I will try it..
Wally, YOUR WRONG..
I kinda feel like Donald Trump now...
Kerry, that done it!
There were no part editor cuts??
Wally, YOUR WRONG..
I kinda feel like Donald Trump now...
Kerry, that done it!
There were no part editor cuts??
Mike Murray
Versatile Cabinet & Solid Surface
mike@versatilecabinet.com
http://www.versatilecabinet.com
Versatile Cabinet & Solid Surface
mike@versatilecabinet.com
http://www.versatilecabinet.com
-
- Wizard Member
- Posts: 4722
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: edge band editor
Mike,
Removing Part Editor Cuts just causes the cabinet or drawer box to re-generate. The bad part is that if you had Part Editor cuts on the box you would have to redo them.
Be sure to save the re-generated box to your files.
Removing Part Editor Cuts just causes the cabinet or drawer box to re-generate. The bad part is that if you had Part Editor cuts on the box you would have to redo them.
Be sure to save the re-generated box to your files.
-
- Guru Member
- Posts: 256
- Joined: Sat, Apr 04 2009, 6:27PM
- Company Name: ShopBot Tools Inc
- Country: UNITED STATES
- Location: Durham NC
Re: edge band editor
Kerry...
I have some existing commercial draw baxes that have a number of PE cuts in them. Do I have to remove them and then reapply and constrain them so that EB quantities will be accurate? I am talking about the 2 notches and holes in the back for BLUM Tandem and Draw Front mounting holes in the front. Please say it isnt so.
I have some existing commercial draw baxes that have a number of PE cuts in them. Do I have to remove them and then reapply and constrain them so that EB quantities will be accurate? I am talking about the 2 notches and holes in the back for BLUM Tandem and Draw Front mounting holes in the front. Please say it isnt so.
Gary Campbell
ShopBot Tools Production Support
ShopBot (eCabinets) Link Training & Support
ShopBot Tools Production Support
ShopBot (eCabinets) Link Training & Support
-
- Wizard Member
- Posts: 4722
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: edge band editor
Gary,
I think the edgebanding quantity problem is a different bug. There is a thread about this somewhere. I'll see if I can find it. I wouldn't do anything about that unil the next release. Maybe the new release will fix that.
I think the edgebanding quantity problem is a different bug. There is a thread about this somewhere. I'll see if I can find it. I wouldn't do anything about that unil the next release. Maybe the new release will fix that.
-
- eCabinets Beta Tester
- Posts: 1263
- Joined: Wed, Jul 01 2009, 2:19PM
- Company Name: Halls Edge Inc
- Country: UNITED STATES
- Location: Stamford, CT USA
- Contact:
Re: edge band editor
From my experience, the drawer box losing part bodies (hence the error about edgebanding it) was spotty, it didn't happen to all my drawer boxes just some of them. But as Kerry said, when you get the error "removing part editor cuts" rebuilds the part bodies and all is well......as long as there's no notches etc. to redo!
jnr
jnr
Josh Rayburn
Hall's Edge, Inc.
CNC Machining Service
Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570
Hall's Edge, Inc.
CNC Machining Service
Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570
-
- Guru Member
- Posts: 477
- Joined: Tue, May 17 2005, 1:55PM
Re: edge band editor
Thanks Mike !!!Michael S Murray wrote: Wally, YOUR WRONG..