need specs for cup dispinsers

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Scott Marshburn
Guru Member
Posts: 837
Joined: Sat, Mar 05 2011, 7:29AM
Company Name: Heritage WoodWorks
Country: UNITED STATES
Location: Jacksonville Nc
Contact:

need specs for cup dispinsers

Post by Scott Marshburn »

we have recived a request to build a beverage center for a convenint store. Dose anyone have resorses for cup dispensers we especialy need cut out dia. we are thinkig along the lines of a one size fit all type.
George Davidson
eCabinets Beta Tester
Posts: 1585
Joined: Tue, May 17 2005, 1:16PM
Location: Norwood Pa.

Re: need specs for cup dispinsers

Post by George Davidson »

I am not sure if this is what you are looking for
Attachments
plastic cup dispenser.jpg
plastic cup dispenser_1.hsf
(38.02 KiB) Downloaded 393 times
George Davidson
eCabinets Beta Tester
Posts: 1585
Joined: Tue, May 17 2005, 1:16PM
Location: Norwood Pa.

Re: need specs for cup dispinsers

Post by George Davidson »

plastic cup dispenser_4 Cups
Attachments
plastic cup dispenser_4 Cups.jpg
plastic cup dispenser_4 cups.hsf
(64.02 KiB) Downloaded 390 times
Scott Marshburn
Guru Member
Posts: 837
Joined: Sat, Mar 05 2011, 7:29AM
Company Name: Heritage WoodWorks
Country: UNITED STATES
Location: Jacksonville Nc
Contact:

Re: need specs for cup dispinsers

Post by Scott Marshburn »

Thanks George for the hsf files.
I did some more homework and found some in the counter despensers like we are loking for along with the cut out dia.
The name brand is despense Rite. I found them at atlantafixture.com.
Now if I was as proficiant with ecab as you I could make the hsf file to put them on my drawing.For now I am learing the basics still. Thanks again.
George Davidson
eCabinets Beta Tester
Posts: 1585
Joined: Tue, May 17 2005, 1:16PM
Location: Norwood Pa.

Re: need specs for cup dispinsers

Post by George Davidson »

Hi Scott
I would like to see the one's you were looking at
Just give me name and the No's for each one
Scott Marshburn
Guru Member
Posts: 837
Joined: Sat, Mar 05 2011, 7:29AM
Company Name: Heritage WoodWorks
Country: UNITED STATES
Location: Jacksonville Nc
Contact:

Re: need specs for cup dispinsers

Post by Scott Marshburn »

George
The modle numbers are Despence Rite ADJ-1 and Despence Rite ADJ-2
George Davidson
eCabinets Beta Tester
Posts: 1585
Joined: Tue, May 17 2005, 1:16PM
Location: Norwood Pa.

Re: need specs for cup dispinsers

Post by George Davidson »

Despence Rite ADJ-1
That's it for now :beer:
Attachments
despence rite adj-1.hsf
(492.02 KiB) Downloaded 392 times
Despence Rite ADJ-1.jpg
Scott Marshburn
Guru Member
Posts: 837
Joined: Sat, Mar 05 2011, 7:29AM
Company Name: Heritage WoodWorks
Country: UNITED STATES
Location: Jacksonville Nc
Contact:

Re: need specs for cup dispinsers

Post by Scott Marshburn »

Thanks George
I wasent expting you to do this for me but I do thank you again.
DanEpps
Wizard Member
Posts: 5852
Joined: Thu, Jul 28 2005, 10:18AM
Company Name: Dan Epps
Country: UNITED STATES
Location: Rocky Face GA

Re: need specs for cup dispinsers

Post by DanEpps »

Scott Marshburn wrote:Thanks George
I wasent expting you to do this for me but I do thank you again.
Never, NEVER toss a 3D bone to George!!! :joker:
Post Reply