Light switch
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- New Member
- Posts: 2
- Joined: Sat, Jul 16 2011, 8:23PM
- Company Name: Figueroas Fine Custom Furnitu
- Country: UNITED STATES
Light switch
Is it possible to place a light switch on the cabinet instead of on the wall?
-
- Wizard Member
- Posts: 1896
- Joined: Wed, May 18 2005, 7:54PM
- Company Name: Milltech Millworks Ltd.
- Country: CANADA
- Location: Edmonton, Alberta
- Contact:
Re: Light switch
Hi Ruben, it is possible by using a Display Object. I don't have one, but I have a DXF file of a double plate if someone can convert it.
- Attachments
-
- lightSwitch- Double.zip
- (3.36 KiB) Downloaded 435 times
-
- eCabinets Beta Tester
- Posts: 1585
- Joined: Tue, May 17 2005, 1:16PM
- Location: Norwood Pa.
Re: Light switch
Light switchs with Plate
- Attachments
-
- ws 2-plate.hsf
- (116.02 KiB) Downloaded 407 times
-
- Wizard Member
- Posts: 1896
- Joined: Wed, May 18 2005, 7:54PM
- Company Name: Milltech Millworks Ltd.
- Country: CANADA
- Location: Edmonton, Alberta
- Contact:
Re: Light switch
Your the man George!
-
- eCabinets Beta Tester
- Posts: 1585
- Joined: Tue, May 17 2005, 1:16PM
- Location: Norwood Pa.
Re: Light switch
Thank You Rick
I hope it works for Ruben
I hope it works for Ruben
-
- New Member
- Posts: 21
- Joined: Mon, Sep 26 2011, 1:44PM
- Company Name: Jahabow
- Country: UNITED STATES
Re: Light switch
George,
I always notice lots of custom hardware/products in your image posts... do you model those externally and import them as STL files, then convert to HSF?
I've been bringing things in that way but I'm not sure I know how to get different colors/finishes applied to different surfaces of the HSFs.
Share some of your secrets with us
Heath
I always notice lots of custom hardware/products in your image posts... do you model those externally and import them as STL files, then convert to HSF?
I've been bringing things in that way but I'm not sure I know how to get different colors/finishes applied to different surfaces of the HSFs.
Share some of your secrets with us
Heath
-
- eCabinets Beta Tester
- Posts: 1585
- Joined: Tue, May 17 2005, 1:16PM
- Location: Norwood Pa.
Re: Light switch
Hi Heath
Yes I make most of them in a Cad program then turn them into Stl and put them in e-Cabinets like you said as HSF.
I find a picture on the web. then bring it into the Cad program and copy it.
If you need help on anything made in Cad let me know.
Yes I make most of them in a Cad program then turn them into Stl and put them in e-Cabinets like you said as HSF.
I find a picture on the web. then bring it into the Cad program and copy it.
If you need help on anything made in Cad let me know.
Re: Light switch
The STL files are brought into the Display Part Editor. There you can change the finish and save it as a HSF file.
Dennis
Dennis