Z - axis

Discuss Thermwood 5-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Clint Buechlein, Jim Bullis

Mohammed riyas
New Member
Posts: 8
Joined: Sun, Jan 01 2012, 3:38AM
Company Name: ARTIC
Country: SAUDI ARABIA
Location: riyadh
Contact:

Z - axis

Postby Mohammed riyas » Wed, Jan 18 2012, 1:44AM

Dears plz help me,
when i cut off pneumatic supply suddenly to machine, the Z - axis move rapidly to its dead end & the bolts connected between pneumatic cylinder to machine are broke off.so, i cant able to move the machine again to its home position and not able to join the cylinder with the machine becoz the holes are miss matching.
plz help me to come out from this issue.

Jan Olinger
Thermwood Team
Posts: 4
Joined: Mon, Aug 15 2005, 10:46AM
Location: Thermwood

Re: Z - axis

Postby Jan Olinger » Thu, Jan 19 2012, 12:06PM

Mohammed riyas wrote:Dears plz help me,
when i cut off pneumatic supply suddenly to machine, the Z - axis move rapidly to its dead end & the bolts connected between pneumatic cylinder to machine are broke off.so, i cant able to move the machine again to its home position and not able to join the cylinder with the machine becoz the holes are miss matching.
plz help me to come out from this issue.
Dear Mohammed,

Please email our service department at: service@thermwood.com and copy me at: jan.olinger@thermwood.com. We need to know which machine is having the issue and which facility in Saudi Arabia you are located. Once we have the details we will help you immediately.

Thanks...Jan Olinger, International Account Manager

Brad McIntosh
Guru Member
Posts: 559
Joined: Wed, May 18 2005, 6:59PM
Company Name: CNC Automation
Country: CANADA
Location: St. Zotique, Québec, Canada
Contact:

Re: Z - axis

Postby Brad McIntosh » Thu, Jan 19 2012, 1:48PM

Appears to be the Arabian Tile Company (AR-TI-C) in Saudi Arabia.

http://www.artic.com.sa/contact.php
Brad McIntosh
CNC Automation

Home: http://www.cncautomation.com
Twitter: @bmcncautomation


Return to “Thermwood 5-Axis Machinery”

Who is online

Users browsing this forum: No registered users and 6 guests