Can anyone tell me how the Corner Stretchers work. When you go in to Add Stretcher Settings there is an option to have
"Back" Stretchers Outside
I have no idea how to add a stretcher to a corner cabinet but this looks like it might lead somewhere.
Thanks!
Corner Stretchers
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Guru Member
- Posts: 833
- Joined: Thu, May 14 2009, 11:41PM
- Company Name: Diamond Lake Custom Woodworks
- Location: Newport, WA
- Contact:
Corner Stretchers
Sincerely,
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
-
- Thermwood Team
- Posts: 857
- Joined: Tue, May 17 2005, 12:47PM
- Company Name: Thermwood
- Country: UNITED STATES
- Location: Thermwood
Re: Corner Stretchers
Two type of corner stretchers: nailers and sleepers. For nailers, just select a back and then add stretcher. You can add the nailer on the inside of the back or the outside. for a sleeper, choose toe kick and a back then add stretcher.
Rick Deskins
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
-
- Wizard Member
- Posts: 4723
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: Corner Stretchers
Rick,
The "Sleeper" doesn't work with an angle front cabinet though. Is this correct?
The "Sleeper" doesn't work with an angle front cabinet though. Is this correct?
-
- Thermwood Team
- Posts: 1740
- Joined: Tue, May 17 2005, 12:44PM
- Company Name: Thermwood Corporation
- Location: Thermwood Corp: Dale, Indiana
- Contact:
Re: Corner Stretchers
Kerry,Kerry Fullington wrote:Rick,
The "Sleeper" doesn't work with an angle front cabinet though. Is this correct?
That is correct. This is because an angle front cab will not always have the back and the toe kick parallel to each other.
Regards,
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
-
- Guru Member
- Posts: 833
- Joined: Thu, May 14 2009, 11:41PM
- Company Name: Diamond Lake Custom Woodworks
- Location: Newport, WA
- Contact:
Re: Corner Stretchers
Very nice feature.
One problem. I add the stretcher and then try to align it with the top of the cabinet. I type in the number 0 for Inset 1 and it keeps changed to -0.1875. No matter what I try, it won't let me set Inset 1 to 0.
Any ideas?
One problem. I add the stretcher and then try to align it with the top of the cabinet. I type in the number 0 for Inset 1 and it keeps changed to -0.1875. No matter what I try, it won't let me set Inset 1 to 0.
Any ideas?
Sincerely,
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
-
- Wizard Member
- Posts: 1896
- Joined: Wed, May 18 2005, 7:54PM
- Company Name: Milltech Millworks Ltd.
- Country: CANADA
- Location: Edmonton, Alberta
- Contact:
Re: Corner Stretchers
Don, can you post the cabinet.
-
- Thermwood Team
- Posts: 1740
- Joined: Tue, May 17 2005, 12:44PM
- Company Name: Thermwood Corporation
- Location: Thermwood Corp: Dale, Indiana
- Contact:
Re: Corner Stretchers
Don posted the cabinet to the beta site and I have tracked the issue down. Seems that the corner cabinet "back" style stretchers will position off by half of the full dado depth (and have ever since their introduction). I have this listed and should be resolved for the next release. You can get around this for now by typing in half of the dado depth for inset #1 and press enter. Doing this will get it to positioned at zero.
Regards,
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000