Scribes and end panels

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Alex Bowler
Junior Member
Posts: 60
Joined: Mon, Mar 26 2012, 10:40PM
Company Name: cutshop
Country: NEW ZEALAND

Scribes and end panels

Postby Alex Bowler » Mon, Apr 02 2012, 5:29PM

Hi,

Is there any way to quickly insert scribes and end panels in the kitchen layout section other then using display panels?
Also is there an equivalent of the align items in the kitchen layout section to snap scribes/end panels to cabinets?

Forrest Chapman
eCabinets Beta Tester
Posts: 1136
Joined: Mon, May 30 2005, 2:26PM
Location: Anderson SC.
Contact:

Re: Scribes and end panels

Postby Forrest Chapman » Mon, Apr 02 2012, 7:15PM

Hover over cabinet and right click menu. Go to "adjust cabinet" and "cabinet end".

Alex Bowler
Junior Member
Posts: 60
Joined: Mon, Mar 26 2012, 10:40PM
Company Name: cutshop
Country: NEW ZEALAND

Re: Scribes and end panels

Postby Alex Bowler » Mon, Apr 02 2012, 8:17PM

Hi,
I think that only applies to cabinets with face frames as it will not allow me to enter any thing in that section?

Forrest Chapman
eCabinets Beta Tester
Posts: 1136
Joined: Mon, May 30 2005, 2:26PM
Location: Anderson SC.
Contact:

Re: Scribes and end panels

Postby Forrest Chapman » Mon, Apr 02 2012, 8:27PM

I should clarify that it only works in Custom Layout. Forrest

Forrest Chapman
eCabinets Beta Tester
Posts: 1136
Joined: Mon, May 30 2005, 2:26PM
Location: Anderson SC.
Contact:

Re: Scribes and end panels

Postby Forrest Chapman » Mon, Apr 02 2012, 8:30PM

To further clarify you must be in overhead view and you must highlight the cabinet before right click, adjust cabinet, cabinet end. Forrest

Alex Bowler
Junior Member
Posts: 60
Joined: Mon, Mar 26 2012, 10:40PM
Company Name: cutshop
Country: NEW ZEALAND

Re: Scribes and end panels

Postby Alex Bowler » Mon, Apr 02 2012, 8:54PM

I tried again in custom layout section, overhead view and with the cabinet selected and was able to open the
window were you can adjust cabinet ends but the scribe section was grayed out. I did read some were that this
section is only available to cabinets with face frames and all the kitchens that we do not have face frames.

Do you know of any other way around this?

Forrest Chapman
eCabinets Beta Tester
Posts: 1136
Joined: Mon, May 30 2005, 2:26PM
Location: Anderson SC.
Contact:

Re: Scribes and end panels

Postby Forrest Chapman » Mon, Apr 02 2012, 10:00PM

What do you want to scribe? If you need the cabinet less wide you will have to make it the desired width to start. If you need say an applied end panel and want it to over hang the front by the thickness of the door then put a - amount in the front inset box and so on for any other desired dimension. Does that help? Forrest

Rick Palechuk
Wizard Member
Posts: 1896
Joined: Wed, May 18 2005, 7:54PM
Company Name: Milltech Millworks Ltd.
Country: CANADA
Location: Edmonton, Alberta
Contact:

Re: Scribes and end panels

Postby Rick Palechuk » Mon, Apr 02 2012, 10:48PM

Hi Alex, here is a way to add scribe strips, or "fillers". Download the job file and click on the filler beside the cabinet and take it to the CE. This filler is a stile from a face frame cabinet that has all the other parts removed. This can now be manipulated like a cabinet (height,width,depth). The depth of this filler is the same as the cabinet, so it will "snap" to the front of the adjacent cabinet, and can be placed like any other cabinet.
Attachments
Cab with Filler.esj
(358.02 KiB) Downloaded 200 times

Alex Bowler
Junior Member
Posts: 60
Joined: Mon, Mar 26 2012, 10:40PM
Company Name: cutshop
Country: NEW ZEALAND

Re: Scribes and end panels

Postby Alex Bowler » Tue, Apr 03 2012, 2:07AM

Hi guys for all your help so far I opened the job the scribe looked good but i was unable to increase the depth through the cabinet editor and normal size settings. Do i need to edit the scribe through the face frame construction settings?

Rick Palechuk
Wizard Member
Posts: 1896
Joined: Wed, May 18 2005, 7:54PM
Company Name: Milltech Millworks Ltd.
Country: CANADA
Location: Edmonton, Alberta
Contact:

Re: Scribes and end panels

Postby Rick Palechuk » Tue, Apr 03 2012, 7:42AM

That is correct. Hilite the scribe, right click select J then E then right click on the part,construction settings, that will open the face frame settings. Go to page two, select the correct width, and OK, return to room, apply changes.

Mark McCallum
Guru Member
Posts: 336
Joined: Thu, Jun 16 2005, 7:53PM
Location: Sydney Aust

Re: Scribes and end panels

Postby Mark McCallum » Tue, Apr 03 2012, 4:26PM

Hi Alex
Another alternative to Ricks.
An end with a door, no hinges.
Attachments
fillit LH700x30.hsf
(78.02 KiB) Downloaded 150 times
fillit LH700x30.jpg
fillit LH700x30.jpg (3.76 KiB) Viewed 4340 times


Return to “eCabinet Systems Software”

Who is online

Users browsing this forum: Google [Bot] and 8 guests