Door desighner question
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Guru Member
- Posts: 837
- Joined: Sat, Mar 05 2011, 7:29AM
- Company Name: Heritage WoodWorks
- Country: UNITED STATES
- Location: Jacksonville Nc
- Contact:
Door desighner question
Is there any way to create a display door in door designer without the edge banding?
Yes! Oh Yes! I Think We Are Going to make It!
https://www.youtube.com/user/ecabinetstips
https://www.facebook.com/groups/397563664342467
https://www.youtube.com/user/ecabinetstips
https://www.facebook.com/groups/397563664342467
-
- Thermwood Team
- Posts: 857
- Joined: Tue, May 17 2005, 12:47PM
- Company Name: Thermwood
- Country: UNITED STATES
- Location: Thermwood
Re: Door desighner question
You can create a slab door with 0 thickness edgebanding that is the same color as the sheet stock if you need to make pe cuts on the display door. If you do not need pe cuts, then you can use an mdf door.
Rick Deskins
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
-
- Guru Member
- Posts: 837
- Joined: Sat, Mar 05 2011, 7:29AM
- Company Name: Heritage WoodWorks
- Country: UNITED STATES
- Location: Jacksonville Nc
- Contact:
Re: Door desighner question
Thanks Rick Four reply:
But I tried that and the Attached pix and hsf file is what I get.I guess what I am asking Is would it be possible to have a selection for no edge banding just as in the edge banding editor
But I tried that and the Attached pix and hsf file is what I get.I guess what I am asking Is would it be possible to have a selection for no edge banding just as in the edge banding editor
- Attachments
-
- test door.esa
- (118.02 KiB) Downloaded 317 times
-
- test door.jpg (7.43 KiB) Viewed 6601 times
Yes! Oh Yes! I Think We Are Going to make It!
https://www.youtube.com/user/ecabinetstips
https://www.facebook.com/groups/397563664342467
https://www.youtube.com/user/ecabinetstips
https://www.facebook.com/groups/397563664342467
-
- Thermwood Team
- Posts: 857
- Joined: Tue, May 17 2005, 12:47PM
- Company Name: Thermwood
- Country: UNITED STATES
- Location: Thermwood
Re: Door desighner question
For a case like this, you should use a display panel. Then use the user part name feature to label the display panel as a door.
Rick Deskins
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
-
- Wizard Member
- Posts: 4723
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: Door designer question
Scott,
Use an MDF door created using your material of choice and then de-select any tooling under the tools tab. This will make a slab door without edge banding.
Use an MDF door created using your material of choice and then de-select any tooling under the tools tab. This will make a slab door without edge banding.
-
- Wizard Member
- Posts: 4723
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: Door desighner question
Sorry, I didn't read close enough. Rick had already suggested this.
-
- Guru Member
- Posts: 837
- Joined: Sat, Mar 05 2011, 7:29AM
- Company Name: Heritage WoodWorks
- Country: UNITED STATES
- Location: Jacksonville Nc
- Contact:
Re: Door desighner question
Thanks Rick that is what I will have to do but this method will not allow me to have the door actually on the cabinet without making it an assembly. I was hoping to avoid that by using a display door instead as all of the doors and drawer fronts for this job are made like the one I posted. Also any hardware holes will have to be placed manually .I could live with the visual deal but that does not look good for a presentation. Also how would the machine react?Maby the option to remove edg banding from display doors could be added?
Yes! Oh Yes! I Think We Are Going to make It!
https://www.youtube.com/user/ecabinetstips
https://www.facebook.com/groups/397563664342467
https://www.youtube.com/user/ecabinetstips
https://www.facebook.com/groups/397563664342467
-
- Guru Member
- Posts: 837
- Joined: Sat, Mar 05 2011, 7:29AM
- Company Name: Heritage WoodWorks
- Country: UNITED STATES
- Location: Jacksonville Nc
- Contact:
Re: Door desighner question
Sorry guys I posted the last before actually giving it a try the display panel method will work without saving as an assembly but I will still have to apply any hardware holes manually
Yes! Oh Yes! I Think We Are Going to make It!
https://www.youtube.com/user/ecabinetstips
https://www.facebook.com/groups/397563664342467
https://www.youtube.com/user/ecabinetstips
https://www.facebook.com/groups/397563664342467