Build 8 install problems

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Greg Haw
New Member
Posts: 17
Joined: Sun, Dec 10 2006, 6:50PM

Build 8 install problems

Post by Greg Haw »

Bought new computer and installed e cabinets. I am running windows 7. It took more ever to get it to load but thanks to this forum I got it. But last problem when I start it I get this message."The Hardware Database failed to update properly. Please try to run the install again and select the repair option.If this problem persists contact Thermwood". Tried the repair and still get same thing. So here I am looking for the solution.
Scott G Vaal
Thermwood Team
Posts: 1740
Joined: Tue, May 17 2005, 12:44PM
Company Name: Thermwood Corporation
Location: Thermwood Corp: Dale, Indiana
Contact:

Re: Build 8 install problems

Post by Scott G Vaal »

Greg,

Please download the zip file from the link below, then extract the .bat file to your desktop. Right-click on the .bat file and choose Run as administrator. When it is finished, you should see a command prompt window that says {Types registered successfully}. If you see this , then press any key to close the window and try to run eCabinet Systems. If the command window shows an error instead, then please report the error back to us.

http://www.thermwood.com/download/Temp_ ... rereg2.zip
Regards,

Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
Greg Haw
New Member
Posts: 17
Joined: Sun, Dec 10 2006, 6:50PM

Re: Build 8 install problems

Post by Greg Haw »

Well I did as posted and got the command prompt . However, it still did not eliminate the error box stated at the start of this thread
Scott G Vaal
Thermwood Team
Posts: 1740
Joined: Tue, May 17 2005, 12:44PM
Company Name: Thermwood Corporation
Location: Thermwood Corp: Dale, Indiana
Contact:

Re: Build 8 install problems

Post by Scott G Vaal »

Greg Haw wrote:Well I did as posted and got the command prompt . However, it still did not eliminate the error box stated at the start of this thread
Did the prompt window says {Types registered successfully} or did it say something else?
Regards,

Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
Greg Haw
New Member
Posts: 17
Joined: Sun, Dec 10 2006, 6:50PM

Re: Build 8 install problems

Post by Greg Haw »

Yes it did say that!
Daniel Odom
Senior Member
Posts: 204
Joined: Thu, Oct 20 2011, 12:52PM
Company Name: Carlton Kitchen and Bath
Country: UNITED STATES

Re: Build 8 install problems

Post by Daniel Odom »

No idea if this will help, but try and turn off uac settings, if on. Sometimes this prevents me from installing programs.
Post Reply