I was wondering if anyone is using this Cabnetware postprocessor and could give me a overview on how it works?
Does it print labels from the control? Are the labels colour coded like Ecabinets?
If there is something in detail on Thermwoods site feel free to give me the link.
Would be interested in users feedback with the pro's and cons listed.
Thanks
Neville
Planits cabnetware postprocessor
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis
-
- Guru Member
- Posts: 622
- Joined: Fri, May 20 2005, 6:48PM
- Company Name: Classic Cabinetry
- Location: Albany Western Australia
- Contact:
Planits cabnetware postprocessor
Neville Australia
-
- eCabinets Beta Tester
- Posts: 1263
- Joined: Wed, Jul 01 2009, 2:19PM
- Company Name: Halls Edge Inc
- Country: UNITED STATES
- Location: Stamford, CT USA
- Contact:
Re: Planits cabnetware postprocessor
Hi Neville,
It does not give you as much control as Thermwood does.
jnr
It does not give you as much control as Thermwood does.
jnr
Josh Rayburn
Hall's Edge, Inc.
CNC Machining Service
Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570
Hall's Edge, Inc.
CNC Machining Service
Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570
-
- Guru Member
- Posts: 622
- Joined: Fri, May 20 2005, 6:48PM
- Company Name: Classic Cabinetry
- Location: Albany Western Australia
- Contact:
Re: Planits cabnetware postprocessor
Thanks Josh for your reply. Do you use CW yourself or have you seen the results? I was hoping to speak to someone on the method,the link is established.
Regards
Neville
Regards
Neville
Neville Australia
-
- eCabinets Beta Tester
- Posts: 1263
- Joined: Wed, Jul 01 2009, 2:19PM
- Company Name: Halls Edge Inc
- Country: UNITED STATES
- Location: Stamford, CT USA
- Contact:
Re: Planits cabnetware postprocessor
Neville,
I don't have CW, I have CV Ultimate. I'm pretty sure they share the same S2M / post processor though. You can email me if you have any questions and I'd be happy to answer what I can.
All the best,
jnr
I don't have CW, I have CV Ultimate. I'm pretty sure they share the same S2M / post processor though. You can email me if you have any questions and I'd be happy to answer what I can.
All the best,
jnr
Josh Rayburn
Hall's Edge, Inc.
CNC Machining Service
Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570
Hall's Edge, Inc.
CNC Machining Service
Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570