x axis error
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis
-
- Junior Member
- Posts: 60
- Joined: Mon, Mar 26 2012, 10:40PM
- Company Name: cutshop
- Country: NEW ZEALAND
x axis error
Hi could anyone let me know why i am getting an x axis error on this file ?
- Attachments
-
- x axis.zip
- (1.96 MiB) Downloaded 482 times
Re: x axis error
I believe that if you change your fixture offset of G901 to G52L1 for the popup pins associated with the corner of your sheet, it will work. I do not get an out-of-bounds error on any axes, but I'm using the desktop version of the control.
Dennis
Dennis
-
- Junior Member
- Posts: 60
- Joined: Mon, Mar 26 2012, 10:40PM
- Company Name: cutshop
- Country: NEW ZEALAND
Re: x axis error
Hi,
I thought i already had it set to use G52L1, i am still learning g code but i though that this section of code referenced
the fixture offset G52L1 and set material dimensions.
SET ZSHIFT=18.0000
[ADJFIXOFF, 1, -2420.0000]
[ADJFIXOFF, 2, -1215.0001]
G52L1
[CLSQCP]
[SETQCPPOS(0)]
[QCP ON]
[SETQCPRANGE(100)]
Is there another setting that i should change as well ?
I thought i already had it set to use G52L1, i am still learning g code but i though that this section of code referenced
the fixture offset G52L1 and set material dimensions.
SET ZSHIFT=18.0000
[ADJFIXOFF, 1, -2420.0000]
[ADJFIXOFF, 2, -1215.0001]
G52L1
[CLSQCP]
[SETQCPPOS(0)]
[QCP ON]
[SETQCPRANGE(100)]
Is there another setting that i should change as well ?
-
- Guru Member
- Posts: 559
- Joined: Wed, May 18 2005, 6:59PM
- Company Name: CNC Automation
- Country: CANADA
- Location: St. Zotique, Québec, Canada
- Contact:
Re: x axis error
What are the X and Y coordinates recorded in entry # 1 in the Fixture Offset Table on the machine? Do they correspond to the coordinates of the corner of your table closest to the pop-up pins?
-
- Junior Member
- Posts: 60
- Joined: Mon, Mar 26 2012, 10:40PM
- Company Name: cutshop
- Country: NEW ZEALAND
Re: x axis error
Hi
Yes the co ordinates for fixture offset 1 are 3670.5 x 2152 y which is the corner closest to pop up pins.
Yes the co ordinates for fixture offset 1 are 3670.5 x 2152 y which is the corner closest to pop up pins.
-
- Guru Member
- Posts: 559
- Joined: Wed, May 18 2005, 6:59PM
- Company Name: CNC Automation
- Country: CANADA
- Location: St. Zotique, Québec, Canada
- Contact:
Re: x axis error
Alex,
This would put the center of the tool 1.1149 mm (2,421.1149-2420) past the pop-up pins at an MACHINE absolute X axis position of 3,671.6149 mm.
You need to check what your absolute limit is for your X axis. (Check the OUT LIMITS.)
- Your program has MAX X position of for T1 (Outline tool) of 2414.7649 mm
- If your G51L1 has a X component of 3670.5 mm
- And your X Axis Adjust (Shift) is -2420
This would put the center of the tool 1.1149 mm (2,421.1149-2420) past the pop-up pins at an MACHINE absolute X axis position of 3,671.6149 mm.
You need to check what your absolute limit is for your X axis. (Check the OUT LIMITS.)
-
- Junior Member
- Posts: 60
- Joined: Mon, Mar 26 2012, 10:40PM
- Company Name: cutshop
- Country: NEW ZEALAND
Re: x axis error
Hi thanks for your help were can i check out limits?
-
- Junior Member
- Posts: 60
- Joined: Mon, Mar 26 2012, 10:40PM
- Company Name: cutshop
- Country: NEW ZEALAND
Re: x axis error
Hi
I think i found them:
Inlimit
x-200.9140
y-0.2540
z-0.2540
Outlimit
x 3670.5540
y 2527.5540
z 246.6340
We use a 9.52mm router bit as well, are these limits set correctly?
I think i found them:
Inlimit
x-200.9140
y-0.2540
z-0.2540
Outlimit
x 3670.5540
y 2527.5540
z 246.6340
We use a 9.52mm router bit as well, are these limits set correctly?