Dear's,
plz help us..........!
we are using C67 DT machine.
while in running the machine suddenly stops & shows an emergency alaram. after that we continue's with homing operation and again run the program but the machine shows, "the draw bar is not fully retract & no tool on the spindle ". even tho we tried manually change the tool but their no Change. The spindle is not running but the other axis are moving upto near to Z offset.
if, anybody knows plz help us to rectify the problem.
plz find the attachment too regarding this issue.
Tool Drop Out
Moderators: Jason Susnjara, Clint Buechlein, Jim Bullis
-
- New Member
- Posts: 8
- Joined: Sun, Jan 01 2012, 3:38AM
- Company Name: ARTIC
- Country: SAUDI ARABIA
- Location: riyadh
- Contact:
-
- Senior Member
- Posts: 249
- Joined: Wed, Dec 10 2008, 3:29PM
- Company Name: Eastcoast Ultimate
- Country: AUSTRALIA
- Contact:
Re: Tool Drop Out
Hi there, probably not much help to you but have you typed in 'draw bar" or similar issue items into the search box? It may help you find a solution.
Core i7-2600 @ 3.70Ghz - 8 GB ram - Win 7 Ultimate 64bit - 2 x 24" ASUS monitors - Nvidia 600 Quadro 1GB graphics
www.eastcoastultimate.com.au
www.eastcoastultimate.com.au