91000 DXF file has no depth
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis
-
- New Member
- Posts: 1
- Joined: Tue, Oct 02 2012, 5:35PM
- Company Name: AA Computer repair
- Country: UNITED STATES
91000 DXF file has no depth
i have 2 dxf files that need to be milled to out and whenever i load them i get an error stating that it cannot be milled because the thickness is 0.00000, each part needs to be milled out of 3/4 inch wood, i have even made a Gcode file with all of the correct cut depths and peices set out but i cannot figure how to import the gcode directly into the machine, or can somebody help me convert my gcode back into a DXF file with the proper depths so the machine can interpret them?
- Attachments
-
- files.zip
- (144.79 KiB) Downloaded 313 times
-
- Senior Member
- Posts: 204
- Joined: Thu, Oct 20 2011, 12:52PM
- Company Name: Carlton Kitchen and Bath
- Country: UNITED STATES
Re: 91000 DXF file has no depth
You need to put the geometry on specifically named layers.... http://order.ecabinetsystems.com/update ... Manual.pdf . Look at page 67.