Invalid afl statement

Discuss Thermwood 3-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis

Post Reply
Jim Carter
Junior Member
Posts: 61
Joined: Mon, Nov 30 2009, 3:51PM
Company Name: Jim Carter Corp.

Invalid afl statement

Post by Jim Carter »

problem between Thermwood Supercontrol version 7.6.4 desktop and Thermwood Supercontrol version 7.4.8.10 installed at the router.
when I write a cnc program at the desk top and try to run it at the machine I get the following error " Invalid AFL Statement"
line before, at and after ( in this order) are,
If [recut_sheet =1[] then
[CLSQCP]
Setqcppos0
several months ago I had this problem and was instructed to insert the line "THM_Version_override=7.4.8.10" under settings in Machine.ini file the directory Rolling nest on my c drive.
I did this on both computers so when I would sync the machine to the desk top I would not loose that setting.
both machine INI files contain this line now, but since I upgraded control nesting versions I have been having this problem.

Thanks for any responses.
Jim
jim@jimcartercorp.com
973-224-0221
Ringwood, New Jersey
Jim Carter
Junior Member
Posts: 61
Joined: Mon, Nov 30 2009, 3:51PM
Company Name: Jim Carter Corp.

Re: Invalid afl statement

Post by Jim Carter »

the sollution was given to me by Danial V.
the newest version of control nesting 5.73 address this issue with a setting under the edit menu.called "Thermwood Software Version Overide"
thanks Dan.
Jim
jim@jimcartercorp.com
973-224-0221
Ringwood, New Jersey
Daniel Vonderheide
Thermwood Team
Posts: 361
Joined: Wed, May 17 2006, 11:25AM
Location: Thermwood

Re: Invalid afl statement

Post by Daniel Vonderheide »

Always glad to help.
Post Reply