from a different Way...
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis
-
- Junior Member
- Posts: 73
- Joined: Fri, Jan 26 2007, 1:44AM
from a different Way...
Ok i figure i will change up this and start fresh and see if anyone can help or know how. Here are the 2 Logo's i need to get done. I need to do them on a 1 inch board within a 3ft Long x 2ft High Oval shape. Just need it to carve out the logo's...Seems like it should be easy...just i've never done it or fooled with a program to do it...
-
- Guru Member
- Posts: 837
- Joined: Sat, Mar 05 2011, 7:29AM
- Company Name: Heritage WoodWorks
- Country: UNITED STATES
- Location: Jacksonville Nc
- Contact:
Re: from a different Way...
Macro what you are wanting to do with these logos can easily be don with a carving program such as art cam or v carve pro . THM has a custom program service that could get this project done for you. Just contact them and I am sure they would be more than glad to help you out.
Yes! Oh Yes! I Think We Are Going to make It!
https://www.youtube.com/user/ecabinetstips
https://www.facebook.com/groups/397563664342467
https://www.youtube.com/user/ecabinetstips
https://www.facebook.com/groups/397563664342467
-
- Junior Member
- Posts: 73
- Joined: Fri, Jan 26 2007, 1:44AM
Re: from a different Way...
i am going to have to really look into V-Carve pro i think I have used it with demo stuff and it seems pretty cool. Just didnt know if doing this on there was a possible thing.
-
- eCabinets Beta Tester
- Posts: 1263
- Joined: Wed, Jul 01 2009, 2:19PM
- Company Name: Halls Edge Inc
- Country: UNITED STATES
- Location: Stamford, CT USA
- Contact:
Re: from a different Way...
Yep it's possible.
Josh Rayburn
Hall's Edge, Inc.
CNC Machining Service
Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570
Hall's Edge, Inc.
CNC Machining Service
Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570
-
- Junior Member
- Posts: 73
- Joined: Fri, Jan 26 2007, 1:44AM
Re: from a different Way...
hey So working on it how far i've got. Just need to figure out how to get my referencing to work off the G902 Fence and then back instead of where i am. But i just set it up like this and its a start!
-
- eCabinets Beta Tester
- Posts: 1263
- Joined: Wed, Jul 01 2009, 2:19PM
- Company Name: Halls Edge Inc
- Country: UNITED STATES
- Location: Stamford, CT USA
- Contact:
Re: from a different Way...
Marco,
Open your code file and change G901 (or G52L1) to G902 (or G52L2) if that's what you need. You can also do this at the controller by arrowing down to the line in question, press tab, edit the line, then enter. Don't forget to arrow back up the the red line you started from before pressing "green to go".
jnr
Open your code file and change G901 (or G52L1) to G902 (or G52L2) if that's what you need. You can also do this at the controller by arrowing down to the line in question, press tab, edit the line, then enter. Don't forget to arrow back up the the red line you started from before pressing "green to go".
jnr
Josh Rayburn
Hall's Edge, Inc.
CNC Machining Service
Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570
Hall's Edge, Inc.
CNC Machining Service
Dell Precision T3400
Win7 Professional 64 Bit/Core2Duo E8400 3ghz/4 GB Ram/NVIDIA Quadro FX570