I just got cs45 set up last week and already experiencing technical problems. since i am new to machine and ecabinet program, not quite sure whether i am doing things right or wrong.this is my model file
Thread continues...
please help
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis
-
- New Member
- Posts: 3
- Joined: Fri, Mar 08 2013, 10:39PM
- Company Name: adf workshop
- Country: NEW ZEALAND
please help
- Attachments
-
- ILU_KIOSK_final_16mm.esj
- this is a setting to cut thin MDF up to 20mm
- (12.02 KiB) Downloaded 339 times
-
- New Member
- Posts: 3
- Joined: Fri, Mar 08 2013, 10:39PM
- Company Name: adf workshop
- Country: NEW ZEALAND
Re: please help..continues...
continue
So error saids, i have not set tool size between X n Y (this case approx 9 n 4.5mm)
on my tool setting i have 10mm, 6mm and 3mm tool ready setup.
my construction is blind dado n set as 55%, 5mm depth tolerance of 0.75mm n 0.5mm bottom and side.
I seriously dont know what i am doing wrong here. Would anyone tell me what am i doing wrong?
So error saids, i have not set tool size between X n Y (this case approx 9 n 4.5mm)
on my tool setting i have 10mm, 6mm and 3mm tool ready setup.
my construction is blind dado n set as 55%, 5mm depth tolerance of 0.75mm n 0.5mm bottom and side.
I seriously dont know what i am doing wrong here. Would anyone tell me what am i doing wrong?
-
- Guru Member
- Posts: 837
- Joined: Sat, Mar 05 2011, 7:29AM
- Company Name: Heritage WoodWorks
- Country: UNITED STATES
- Location: Jacksonville Nc
- Contact:
Re: please help
By The screen shots It looks like you do not have the material MDF-12 in tool group1.Try adding the material into Group1 and make sure that you have the cutter that will cut the dado set to Rout / Dado.
Yes! Oh Yes! I Think We Are Going to make It!
https://www.youtube.com/user/ecabinetstips
https://www.facebook.com/groups/397563664342467
https://www.youtube.com/user/ecabinetstips
https://www.facebook.com/groups/397563664342467
-
- New Member
- Posts: 3
- Joined: Fri, Mar 08 2013, 10:39PM
- Company Name: adf workshop
- Country: NEW ZEALAND
Re: please help
Thank you very much for that. I will look into that now.Scott Marshburn wrote:By The screen shots It looks like you do not have the material MDF-12 in tool group1.Try adding the material into Group1 and make sure that you have the cutter that will cut the dado set to Rout / Dado.
My understanding is that (Thermwood cnc setup technician) have set the group 1 materials to up to 20mm materials including MDFs.
When i used 10mm for outline and 6mm for Rout / dDado... error said samething but X n Y value chnages (5mm to 3mm)
when i switch to 6mm for outline and 3mm for Rout / Dado..... saids " not set tool between 8.5 to 5.5mm.
I am puzzled by this...I will certainly look in to material group setting now and see anything odd there. not that i know whats odd or not..lol
would you mind ask, what are a size of cutter that cuts dado? or i need to get? I have set the ticked box saids Rout / Dado..which is second pic i attached.
hmmm....
-
- Guru Member
- Posts: 837
- Joined: Sat, Mar 05 2011, 7:29AM
- Company Name: Heritage WoodWorks
- Country: UNITED STATES
- Location: Jacksonville Nc
- Contact:
Re: please help
Please excuse me from not completely understanding or using Metric measurements but as for our machine witch is Imperial units If we need to cut a dado 3/4" wide there Needs to be a cutter set up in the tool group that will cut a dado 3/4 in. wide In other words a cutter with a diameter of 1/4 in. will never be used to dado a 3/4in. wide dado But a cutter that has a diameter of 1/2 In. will cut that dado
Yes! Oh Yes! I Think We Are Going to make It!
https://www.youtube.com/user/ecabinetstips
https://www.facebook.com/groups/397563664342467
https://www.youtube.com/user/ecabinetstips
https://www.facebook.com/groups/397563664342467