Post Processor using V Carve on a CS43

Discuss Thermwood 3-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Rich Kasten

Alex Ferrec
New Member
Posts: 2
Joined: Tue, Feb 25 2014, 5:09PM
Company Name: Rylex
Country: UNITED STATES

Post Processor using V Carve on a CS43

Postby Alex Ferrec » Tue, Mar 11 2014, 12:59PM

Wondering if there is a post processor selection in VCarve Pro that would work best with a cs43.

Thanks for any help

jason galbraith
Senior Member
Posts: 249
Joined: Wed, Dec 10 2008, 3:29PM
Company Name: Eastcoast Ultimate
Country: AUSTRALIA
Contact:

Re: Post Processor using V Carve on a CS43

Postby jason galbraith » Tue, Mar 11 2014, 4:14PM

Core i7-2600 @ 3.70Ghz - 8 GB ram - Win 7 Ultimate 64bit - 2 x 24" ASUS monitors - Nvidia 600 Quadro 1GB graphics
www.eastcoastultimate.com.au

Alex Ferrec
New Member
Posts: 2
Joined: Tue, Feb 25 2014, 5:09PM
Company Name: Rylex
Country: UNITED STATES

Re: Post Processor using V Carve on a CS43

Postby Alex Ferrec » Wed, Mar 12 2014, 10:00AM

Thanks for the response. I realized that with the demo version of V Carve, I can't upload the post processor. I want to see if something could get cut out using this software. I tried loading the .nc file but there are no parts listed on the controller. I don't know if this is possible, but if someone could send me a small .nc toolpath file with the edited post processor that would work with a CS43 that would be really helpful. That way I could dry run the file on the CNC. Again, I just want to see if the machine will run something because I am looking to purchase V Carve.


Return to “Thermwood 3-Axis Machinery”

Who is online

Users browsing this forum: No registered users and 3 guests