Error while writting CNC

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Audrey Racine
eCabinets Beta Tester
Posts: 164
Joined: Tue, May 17 2005, 6:31AM
Location: Canada, Quebec city

Error while writting CNC

Post by Audrey Racine »

Hi,

I have a question. I'v been working on this assemblie and I tried to write the CNC file but I always get this error message: Error 80090016 during CryptAcquireContext! I tried from the layout and from the cabinet editor and still have the same error. I didn't try to change the material tichkness. Is it possible to let me know is wrong with my file?

Thank you!
Attachments
Meuble caisse 2.esa
(6.4 MiB) Downloaded 311 times
Write CNC.jpg
Module.jpg
Rick Deskins
Thermwood Team
Posts: 857
Joined: Tue, May 17 2005, 12:47PM
Company Name: Thermwood
Country: UNITED STATES
Location: Thermwood

Re: Error while writting CNC

Post by Rick Deskins »

1. Save the file from the link below to the desktop.
2. Open up a command prompt and then type "cd desktop" then enter (do not type the quotes).
3. Next type "thmcrypt.exe" then hit enter. it should tell you 3 files have been copied.
a. If it does not and you are running XP, you will need to go into Windows explorer and delete the following directory, "C:\documents and settings\"user name"\application data\microsoft\crypto\RSA". In Windows 7 the path is"C:\Users\username\AppData\Roaming\Microsoft\Crypto\RSA".
4. Once that directory is deleted you will need to run the thmcrypt.exe file from a dos prompt again.

http://www.thermwood.com/download/temp_ ... mcrypt.exe
Rick Deskins
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
Post Reply