CN Sheet printout formatting
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis
-
- eCabinets Beta Tester
- Posts: 1119
- Joined: Tue, May 10 2005, 9:36PM
- Company Name: Corlane Custom Cabinetry LLC
- Country: UNITED STATES
- Location: Carnesville, GA
- Contact:
CN Sheet printout formatting
Pretty please could we have larger margins on the nest sheets printed by CN? The names are almost always crammed and overlapped, while there are huge margins that, if used, would alleviate 99% of the problem. With sugar on top?
http://www.corlanecabinetry.com
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
-
- New Member
- Posts: 2
- Joined: Fri, Oct 03 2014, 8:40AM
- Company Name: Misani Custom Design
- Country: CANADA
Re: CN Sheet printout formatting
Increase your collar and clearance between parts in the general settings of the nesting program .Pretty please could we have larger margins on the nest sheets printed by CN? The names are almost always crammed and overlapped, while there are huge margins that, if used, would alleviate 99% of the problem.
-
- Guru Member
- Posts: 559
- Joined: Wed, May 18 2005, 6:59PM
- Company Name: CNC Automation
- Country: CANADA
- Location: St. Zotique, Québec, Canada
- Contact:
Re: CN Sheet printout formatting
Blair,
I believe Jeremy is talking about the PRINT OUT margins and NOT those associated with the actual nesting. As you can see in Jeremy's report example, long part names and over-run other columns.
Jeremy - in addition to your "margin" adjustments, perhaps some of the columns need to be redefined (some reduced in width, others increased). Also, a point size or two reduction in the font used as well as some of these fields actually "wrapping" in extreme cases would help.
I believe Jeremy is talking about the PRINT OUT margins and NOT those associated with the actual nesting. As you can see in Jeremy's report example, long part names and over-run other columns.
Jeremy - in addition to your "margin" adjustments, perhaps some of the columns need to be redefined (some reduced in width, others increased). Also, a point size or two reduction in the font used as well as some of these fields actually "wrapping" in extreme cases would help.
-
- eCabinets Beta Tester
- Posts: 1119
- Joined: Tue, May 10 2005, 9:36PM
- Company Name: Corlane Custom Cabinetry LLC
- Country: UNITED STATES
- Location: Carnesville, GA
- Contact:
Re: CN Sheet printout formatting
You're right, Brad, the text overlapping is what I'm talking about. I have not seen any way to change the width of the columns or the size of the font on these printouts. Have I just overlooked something? Please say "Yes, dummy, you have."
http://www.corlanecabinetry.com
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12