Flip ops

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
tim lucas
Guru Member
Posts: 322
Joined: Thu, Nov 29 2007, 5:18PM
Company Name: Tim Lucas Custom Woodworks LLC
Country: UNITED STATES
Location: bell, florida
Contact:

Flip ops

Post by tim lucas »

Searching through the forum I found part of my answer as I should place my part label on the lower left of my part and then when I flip it the label will be on the lower right face down - with my machine set Y-axis =48 and X-axis =96 would I be standing at the Y-axis or X -axis to attach the label on the lower left?
Thanks
Tim
Tim Lucas Custom Woodworks LLC
www.TLCW.us
Nat Wheatley
eCabinets Beta Tester
Posts: 491
Joined: Wed, Apr 15 2009, 8:22PM
Company Name: Plymouth Custom Closets
Country: UNITED STATES
Location: Plympton, MA

Re: Flip ops

Post by Nat Wheatley »

Tim,

The help section on Link shows how the sheet is flipped (depends on what settings you've selected). To get to the help section click the blue 'button' over the 'Write to Shopbot' button on the main screen of the Link. I typed 'flip' into the search bar and the first choice is 'Flip Ops First' which explains how the sheet is flipped.
http://www.plymouthcustomclosets.com

Dell Precision 490/ Intel Xeon 3.20 Ghz/3 GB RAM/ Nvidia Quadro FX 3450/ Windows XP, sp 3
tim lucas
Guru Member
Posts: 322
Joined: Thu, Nov 29 2007, 5:18PM
Company Name: Tim Lucas Custom Woodworks LLC
Country: UNITED STATES
Location: bell, florida
Contact:

Re: Flip ops

Post by tim lucas »

Thank you!!
Tim Lucas Custom Woodworks LLC
www.TLCW.us
Post Reply