When working in the different editors I hide parts so I can work on parts behind it. I make a change to something - like constructions settings - and all the hiding I did gets undone.
It would be really nice for the software to remember which parts have been hidden when doing regeneration. When you exit the editor then unhide the parts. But while in the editor keep them hidden unless user explicitly unhides them using the context menu.
Would be a huge time saver.
Thanks!
Would be a nice feature in next version
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Guru Member
- Posts: 833
- Joined: Thu, May 14 2009, 11:41PM
- Company Name: Diamond Lake Custom Woodworks
- Location: Newport, WA
- Contact:
Would be a nice feature in next version
Sincerely,
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
-
- Guru Member
- Posts: 640
- Joined: Tue, Jan 16 2007, 7:56PM
- Company Name: LRG WoodCrafting
- Location: Windsor Locks, CT
- Contact:
Re: Would be a nice feature in next version
There seem to be a few things that aren't remembered when you go back. Along with that same thought is when you are in the nesting area and you highlight a pc of plywood to look at the parts within and then you go back you are at the top of the page again.
When you put crown on a cabinet and then you go back all the input numbers are nowhere to be found, so you are forced to remember what you inputted.
When you put crown on a cabinet and then you go back all the input numbers are nowhere to be found, so you are forced to remember what you inputted.
Dell Precision 7710
Intel Core i7-6820HQ @ 2.70GHz 16.00 GB RAM
NVIDIA Quadro M3000M
512 GB PCIe NVMe - M.2 SSD
Win 7 Pro 64-bit
http://lrgwood.com
Intel Core i7-6820HQ @ 2.70GHz 16.00 GB RAM
NVIDIA Quadro M3000M
512 GB PCIe NVMe - M.2 SSD
Win 7 Pro 64-bit
http://lrgwood.com