Offfall numbers on nest printouts...
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis
-
- eCabinets Beta Tester
- Posts: 1119
- Joined: Tue, May 10 2005, 9:36PM
- Company Name: Corlane Custom Cabinetry LLC
- Country: UNITED STATES
- Location: Carnesville, GA
- Contact:
Offfall numbers on nest printouts...
If it could be implemented so that the added offfall sheets show the offfall number on the printed nest diagrams, it would sure be awesome. For example, instead of saying "3/4 Plywood (Added 1)", it could say "3/4 Plywood (Offfall 123456789 Added 1)... this would sure save me personally a lot of time, especially in the (often occuring) case where a job has to be re-nested after the nest sheets are printed and all the offfall loaded again.
http://www.corlanecabinetry.com
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
-
- eCabinets Beta Tester
- Posts: 1237
- Joined: Mon, May 30 2005, 2:26PM
- Location: Anderson SC.
- Contact:
Re: Offfall numbers on nest printouts...
Hey Jeremy, in the meantime you can just put a number on your sheets in the order you added them. That's what I do.
Forrest
Forrest
-
- eCabinets Beta Tester
- Posts: 1119
- Joined: Tue, May 10 2005, 9:36PM
- Company Name: Corlane Custom Cabinetry LLC
- Country: UNITED STATES
- Location: Carnesville, GA
- Contact:
Re: Offfall numbers on nest printouts...
True, but...but... okay, I can barely read my own handwriting.
Hey, where've you been anyway? I've called and texted a few times, did you change phone numbers on me? Don't make me act like a psycho girlfriend, here....
Hey, where've you been anyway? I've called and texted a few times, did you change phone numbers on me? Don't make me act like a psycho girlfriend, here....
http://www.corlanecabinetry.com
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
-
- eCabinets Beta Tester
- Posts: 1119
- Joined: Tue, May 10 2005, 9:36PM
- Company Name: Corlane Custom Cabinetry LLC
- Country: UNITED STATES
- Location: Carnesville, GA
- Contact:
Re: Offfall numbers on nest printouts...
To clarify, here's what I mean: I've attached a picture of an offfall label (the number is -774444477) and the corresponding nest printout from Control Nesting. See where I added in the number from the offfall label? That would be super handy.
http://www.corlanecabinetry.com
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
-
- Thermwood Team
- Posts: 1740
- Joined: Tue, May 17 2005, 12:44PM
- Company Name: Thermwood Corporation
- Location: Thermwood Corp: Dale, Indiana
- Contact:
Re: Offfall numbers on nest printouts...
Jeremy,
After a conversation with the programmer, it looks like we will be able to implement this in the next version. In addition, we are going to have it be included in the on screen instructions when loading a sheet as well.
After a conversation with the programmer, it looks like we will be able to implement this in the next version. In addition, we are going to have it be included in the on screen instructions when loading a sheet as well.
Regards,
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
-
- eCabinets Beta Tester
- Posts: 1119
- Joined: Tue, May 10 2005, 9:36PM
- Company Name: Corlane Custom Cabinetry LLC
- Country: UNITED STATES
- Location: Carnesville, GA
- Contact:
Re: Offfall numbers on nest printouts...
You da man, Scott! Thanks!
http://www.corlanecabinetry.com
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
-
- Guru Member
- Posts: 837
- Joined: Sat, Mar 05 2011, 7:29AM
- Company Name: Heritage WoodWorks
- Country: UNITED STATES
- Location: Jacksonville Nc
- Contact:
Re: Offfall numbers on nest printouts...
It would be nice to include the barcode also.
We usually peel off the label after loading the sheet and stick it on the print out. This way if the sheet has been cut and the job needs to be re nested we can just scan the codes again in the same order.
We usually peel off the label after loading the sheet and stick it on the print out. This way if the sheet has been cut and the job needs to be re nested we can just scan the codes again in the same order.
Yes! Oh Yes! I Think We Are Going to make It!
https://www.youtube.com/user/ecabinetstips
https://www.facebook.com/groups/397563664342467
https://www.youtube.com/user/ecabinetstips
https://www.facebook.com/groups/397563664342467