I am nesting a kitchen project and for some reason, eCabs will not nest 8 adjustable shelves that measure 7.0025"W x 21.774"L. I'm not sure why the program would pick these shelves to not be able to nest. I have deleted and added them back in multiple times with the same results. I wish there was a reason attached as to why the parts could not be nested.
Anyone know of a way to find out why eCabs won't nest these parts?
Nesting warning
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Guru Member
- Posts: 833
- Joined: Thu, May 14 2009, 11:41PM
- Company Name: Diamond Lake Custom Woodworks
- Location: Newport, WA
- Contact:
Nesting warning
Sincerely,
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
-
- Guru Member
- Posts: 833
- Joined: Thu, May 14 2009, 11:41PM
- Company Name: Diamond Lake Custom Woodworks
- Location: Newport, WA
- Contact:
Re: Nesting warning
Tried to upload the cabinet and the forum won't let me. The file is 1.3MB in size. This seems very excessive for an upper cabinet that is 93" long x 9" deep x 40" tall. Not sure what gives. Anyone have suggestions on how to get the hsf file uploaded?
Sincerely,
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
-
- Guru Member
- Posts: 833
- Joined: Thu, May 14 2009, 11:41PM
- Company Name: Diamond Lake Custom Woodworks
- Location: Newport, WA
- Contact:
Re: Nesting warning
Interesting development - the nesting problem occurs only if I add edge banding to the shelf. I did an experiment where I added edgebanding to 1 shelf and eCabs spit out an error on nesting that one shelf.
Sincerely,
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
-
- Thermwood Team
- Posts: 857
- Joined: Tue, May 17 2005, 12:47PM
- Company Name: Thermwood
- Country: UNITED STATES
- Location: Thermwood
Re: Nesting warning
Can you try to upload your file again?
Rick Deskins
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
-
- Guru Member
- Posts: 833
- Joined: Thu, May 14 2009, 11:41PM
- Company Name: Diamond Lake Custom Woodworks
- Location: Newport, WA
- Contact:
Re: Nesting warning
I sent a copy to Ryan via email.
Sincerely,
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
-
- Guru Member
- Posts: 833
- Joined: Thu, May 14 2009, 11:41PM
- Company Name: Diamond Lake Custom Woodworks
- Location: Newport, WA
- Contact:
Re: Nesting warning
Here it is without edgebanding
- Attachments
-
- Island A - Bar cabinet.hsf
- (1.04 MiB) Downloaded 303 times
Sincerely,
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
-
- Thermwood Team
- Posts: 1740
- Joined: Tue, May 17 2005, 12:44PM
- Company Name: Thermwood Corporation
- Location: Thermwood Corp: Dale, Indiana
- Contact:
Re: Nesting warning
Don,
I added edge banding (used an EB material that I have that is .02" thick) to all edges of the 8 shelves in your cabinet and it seems to nest just fine for me. Can you add the banding that you are using and then attach that version for me to try.
I added edge banding (used an EB material that I have that is .02" thick) to all edges of the 8 shelves in your cabinet and it seems to nest just fine for me. Can you add the banding that you are using and then attach that version for me to try.
Regards,
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
-
- Guru Member
- Posts: 833
- Joined: Thu, May 14 2009, 11:41PM
- Company Name: Diamond Lake Custom Woodworks
- Location: Newport, WA
- Contact:
Re: Nesting warning
Ok. I guess I used eCabs to much yesterday and it got really tired. Today I can edgeband the shelves in this cabinet and it nests just fine.
I guess I will need to give eCabs a couple of coffee breaks and a lunch break during the day so it can rest....
I've attached the cabinet with the shelves edgebanded.
I guess I will need to give eCabs a couple of coffee breaks and a lunch break during the day so it can rest....
I've attached the cabinet with the shelves edgebanded.
- Attachments
-
- Island A - Bar cabinet.hsf
- (1.04 MiB) Downloaded 297 times
Sincerely,
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com