Trying to fillet a corner this morning and it wont select the long front edge, it will select the short edge in front of the angle base. Want to fillet the left front corner. I did double check the edge to make sure it is a front edge, selects left edge ok.
Tim
Countertop fillet
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Guru Member
- Posts: 322
- Joined: Thu, Nov 29 2007, 5:18PM
- Company Name: Tim Lucas Custom Woodworks LLC
- Country: UNITED STATES
- Location: bell, florida
- Contact:
Countertop fillet
Tim Lucas Custom Woodworks LLC
www.TLCW.us
www.TLCW.us
-
- Thermwood Team
- Posts: 1740
- Joined: Tue, May 17 2005, 12:44PM
- Company Name: Thermwood Corporation
- Location: Thermwood Corp: Dale, Indiana
- Contact:
Re: Countertop fillet
Tim,
I am unable to reproduce it here. Can you attach the job that this c-top is in and I will see it the same issue happens for me. If you would rather email it, send it to cabinets@thermwood.com ( please put attn: Scott in the subject line). Also, please let me know here on the forum if you choose to emailed it (sometimes it can get caught by the spam filter and I may not see it right away). Thanks.
I am unable to reproduce it here. Can you attach the job that this c-top is in and I will see it the same issue happens for me. If you would rather email it, send it to cabinets@thermwood.com ( please put attn: Scott in the subject line). Also, please let me know here on the forum if you choose to emailed it (sometimes it can get caught by the spam filter and I may not see it right away). Thanks.
Regards,
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000
-
- Guru Member
- Posts: 322
- Joined: Thu, Nov 29 2007, 5:18PM
- Company Name: Tim Lucas Custom Woodworks LLC
- Country: UNITED STATES
- Location: bell, florida
- Contact:
Re: Countertop fillet
Hi Scott,
Emailed the job to you this morning
Thanks
Tim
Emailed the job to you this morning
Thanks
Tim
Tim Lucas Custom Woodworks LLC
www.TLCW.us
www.TLCW.us