Problems with 6.1

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Donald Thomson
Guru Member
Posts: 666
Joined: Thu, May 14 2009, 11:41PM
Company Name: Diamond Lake Custom Woodworks
Location: Newport, WA
Contact:

Problems with 6.1

Postby Donald Thomson » Wed, Nov 04 2015, 3:03PM

I loaded a job that worked perfectly in the beta and RC versions and saved it yesterday under the last RC version. I've nested it on multiple occasions, run cutlists and many other operations with no problem.

Now I load the project into 6.1 and run a nesting operation and get the following error dialog. Please tell me I am not going to have to go through and rebuild all the cabinets under 6.1. That will take hours of work and I don't have time to do that.
Attachments
Untitled.png
Sincerely,

Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com

Rick Deskins
Thermwood Team
Posts: 828
Joined: Tue, May 17 2005, 12:47PM
Company Name: Thermwood
Country: UNITED STATES
Location: Thermwood

Re: Problems with 6.1

Postby Rick Deskins » Wed, Nov 04 2015, 3:11PM

No changes were made between the last RC and the Release. Can you send the job to cabinets@thermwood.com for us to take a look at?
Rick Deskins
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900

Forrest Chapman
eCabinets Beta Tester
Posts: 1079
Joined: Mon, May 30 2005, 2:26PM
Location: Anderson SC.
Contact:

Re: Problems with 6.1

Postby Forrest Chapman » Wed, Nov 04 2015, 3:47PM

I just encountered the same issue with a cabinet that I've used for a couple years with no issues. It does seem to nest okay though.

Also I got the warning when I output the twd not when it loaded in control nest.

Forrest

Donald Thomson
Guru Member
Posts: 666
Joined: Thu, May 14 2009, 11:41PM
Company Name: Diamond Lake Custom Woodworks
Location: Newport, WA
Contact:

Re: Problems with 6.1

Postby Donald Thomson » Wed, Nov 04 2015, 5:06PM

Rick,

I will ZIP the job and send it.
Sincerely,

Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com

Donald Thomson
Guru Member
Posts: 666
Joined: Thu, May 14 2009, 11:41PM
Company Name: Diamond Lake Custom Woodworks
Location: Newport, WA
Contact:

Re: Problems with 6.1

Postby Donald Thomson » Wed, Nov 04 2015, 5:46PM

Rick,

I keep getting an error when I email this project. It says

Error 552: DATA size exceeds the maximum permitted.

Don't think it's on my end because I've sent larger emails, then the one I'm trying to send to you, to other people.
Sincerely,

Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com

Rick Deskins
Thermwood Team
Posts: 828
Joined: Tue, May 17 2005, 12:47PM
Company Name: Thermwood
Country: UNITED STATES
Location: Thermwood

Re: Problems with 6.1

Postby Rick Deskins » Wed, Nov 04 2015, 5:58PM

Will it send if you zip it?
Rick Deskins
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900

Donald Thomson
Guru Member
Posts: 666
Joined: Thu, May 14 2009, 11:41PM
Company Name: Diamond Lake Custom Woodworks
Location: Newport, WA
Contact:

Re: Problems with 6.1

Postby Donald Thomson » Wed, Nov 04 2015, 8:29PM

I did ZIP it. 23.6MB zipped.
Sincerely,

Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com

Clint Buechlein
Thermwood Team
Posts: 170
Joined: Fri, May 15 2015, 1:21PM
Company Name: Thermwood Corp
Country: UNITED STATES

Re: Problems with 6.1

Postby Clint Buechlein » Thu, Nov 05 2015, 11:40AM

Don,

Do you have a DropBox account? If you do load the file there and email the link for it to cabinets@thermwood.com

If you don't you can go to www.dropbox.com and sign up for one. It is a free file sharing website. After you have signed up and logged in, there is a button to upload a file. Once it has been uploaded, you have the option to share a link to the file. You can either copy and paste the link into an email and send it to us, or within the dialog box you can put an email address in to share the link.

Clint

Donald Thomson
Guru Member
Posts: 666
Joined: Thu, May 14 2009, 11:41PM
Company Name: Diamond Lake Custom Woodworks
Location: Newport, WA
Contact:

Re: Problems with 6.1

Postby Donald Thomson » Fri, Nov 06 2015, 12:24PM

Rick,

Here is the Dropbox location of the file

https://www.dropbox.com/s/pwx4zpfqgmguu ... t.esj?dl=0
Sincerely,

Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com


Return to “eCabinet Systems Software”

Who is online

Users browsing this forum: Google [Bot] and 8 guests