Problems with 6.1
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Guru Member
- Posts: 833
- Joined: Thu, May 14 2009, 11:41PM
- Company Name: Diamond Lake Custom Woodworks
- Location: Newport, WA
- Contact:
Problems with 6.1
I loaded a job that worked perfectly in the beta and RC versions and saved it yesterday under the last RC version. I've nested it on multiple occasions, run cutlists and many other operations with no problem.
Now I load the project into 6.1 and run a nesting operation and get the following error dialog. Please tell me I am not going to have to go through and rebuild all the cabinets under 6.1. That will take hours of work and I don't have time to do that.
Now I load the project into 6.1 and run a nesting operation and get the following error dialog. Please tell me I am not going to have to go through and rebuild all the cabinets under 6.1. That will take hours of work and I don't have time to do that.
Sincerely,
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
-
- Thermwood Team
- Posts: 857
- Joined: Tue, May 17 2005, 12:47PM
- Company Name: Thermwood
- Country: UNITED STATES
- Location: Thermwood
Re: Problems with 6.1
No changes were made between the last RC and the Release. Can you send the job to cabinets@thermwood.com for us to take a look at?
Rick Deskins
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
-
- eCabinets Beta Tester
- Posts: 1237
- Joined: Mon, May 30 2005, 2:26PM
- Location: Anderson SC.
- Contact:
Re: Problems with 6.1
I just encountered the same issue with a cabinet that I've used for a couple years with no issues. It does seem to nest okay though.
Also I got the warning when I output the twd not when it loaded in control nest.
Forrest
Also I got the warning when I output the twd not when it loaded in control nest.
Forrest
-
- Guru Member
- Posts: 833
- Joined: Thu, May 14 2009, 11:41PM
- Company Name: Diamond Lake Custom Woodworks
- Location: Newport, WA
- Contact:
Re: Problems with 6.1
Rick,
I will ZIP the job and send it.
I will ZIP the job and send it.
Sincerely,
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
-
- Guru Member
- Posts: 833
- Joined: Thu, May 14 2009, 11:41PM
- Company Name: Diamond Lake Custom Woodworks
- Location: Newport, WA
- Contact:
Re: Problems with 6.1
Rick,
I keep getting an error when I email this project. It says
Error 552: DATA size exceeds the maximum permitted.
Don't think it's on my end because I've sent larger emails, then the one I'm trying to send to you, to other people.
I keep getting an error when I email this project. It says
Error 552: DATA size exceeds the maximum permitted.
Don't think it's on my end because I've sent larger emails, then the one I'm trying to send to you, to other people.
Sincerely,
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
-
- Thermwood Team
- Posts: 857
- Joined: Tue, May 17 2005, 12:47PM
- Company Name: Thermwood
- Country: UNITED STATES
- Location: Thermwood
Re: Problems with 6.1
Will it send if you zip it?
Rick Deskins
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
-
- Guru Member
- Posts: 833
- Joined: Thu, May 14 2009, 11:41PM
- Company Name: Diamond Lake Custom Woodworks
- Location: Newport, WA
- Contact:
Re: Problems with 6.1
I did ZIP it. 23.6MB zipped.
Sincerely,
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
-
- Thermwood Team
- Posts: 702
- Joined: Fri, May 15 2015, 1:21PM
- Company Name: Thermwood Corp
- Country: UNITED STATES
Re: Problems with 6.1
Don,
Do you have a DropBox account? If you do load the file there and email the link for it to cabinets@thermwood.com
If you don't you can go to www.dropbox.com and sign up for one. It is a free file sharing website. After you have signed up and logged in, there is a button to upload a file. Once it has been uploaded, you have the option to share a link to the file. You can either copy and paste the link into an email and send it to us, or within the dialog box you can put an email address in to share the link.
Clint
Do you have a DropBox account? If you do load the file there and email the link for it to cabinets@thermwood.com
If you don't you can go to www.dropbox.com and sign up for one. It is a free file sharing website. After you have signed up and logged in, there is a button to upload a file. Once it has been uploaded, you have the option to share a link to the file. You can either copy and paste the link into an email and send it to us, or within the dialog box you can put an email address in to share the link.
Clint
-
- Guru Member
- Posts: 833
- Joined: Thu, May 14 2009, 11:41PM
- Company Name: Diamond Lake Custom Woodworks
- Location: Newport, WA
- Contact:
Re: Problems with 6.1
Rick,
Here is the Dropbox location of the file
https://www.dropbox.com/s/pwx4zpfqgmguu ... t.esj?dl=0
Here is the Dropbox location of the file
https://www.dropbox.com/s/pwx4zpfqgmguu ... t.esj?dl=0
Sincerely,
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com