Is there a way to tell the software to make a drawer box out of board stock instead of sheet stock. I am making trays for a pantry and for both look and strength I make them out of oak.
Thanks
Trays Stock
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Guru Member
- Posts: 322
- Joined: Thu, Nov 29 2007, 5:18PM
- Company Name: Tim Lucas Custom Woodworks LLC
- Country: UNITED STATES
- Location: bell, florida
- Contact:
Re: Trays Stock
Yes, just add your board stock to the sheet goods listing, ie you have a board 8" wide by 96" long and 5/8" thick and your drawer parts are maybe 5" wide by 20" long it will nest them on that size sheet (board) - sometimes I glue up a panel 24" wide and 30" long by 3/4" thick and add that to my sheet goods then nest a drawer from it and make it a small chest - you can have a plywood deck with solid sides by setting your deck material different.
Tim
Tim
Tim Lucas Custom Woodworks LLC
www.TLCW.us
www.TLCW.us
Re: Trays Stock
Awesome. I should have thought about that myself.
-
- eCabinets Beta Tester
- Posts: 1740
- Joined: Tue, May 17 2005, 8:33PM
- Company Name: Timeless Cabinetry and Mantles
- Location: South East
Re: Trays Stock
In addition to Tim's suggestion, you can also set "Maximum Drawer box Height" to accommodate general heights of the boxes for your common board stock.
Intel Core i7-5820K (6-Cores, 3.3GHz, 15MB Cache)
32Gigs DDR4
NVIDIA GeForce GTX 960 4GB
SSD 840 256Gig, 2TB, 3TB, Samsung (2TB)
Corsair RM650
32Gigs DDR4
NVIDIA GeForce GTX 960 4GB
SSD 840 256Gig, 2TB, 3TB, Samsung (2TB)
Corsair RM650