Attached is an LDE rendering of a cabinet. Also attached is the cabinet hsf file.
Brought cabinet in from CE
Hide drawer faces and doors
Hide stretchers
Hide back of cabinet
Now there are all these extra lines and I don't know where they came from. It makes setting dimensions a bit difficult.
LDE problem with latest upgrade
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Guru Member
- Posts: 833
- Joined: Thu, May 14 2009, 11:41PM
- Company Name: Diamond Lake Custom Woodworks
- Location: Newport, WA
- Contact:
LDE problem with latest upgrade
- Attachments
-
- Master Vanity.zip
- HSF file
- (705.68 KiB) Downloaded 456 times
Sincerely,
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
-
- Thermwood Team
- Posts: 857
- Joined: Tue, May 17 2005, 12:47PM
- Company Name: Thermwood
- Country: UNITED STATES
- Location: Thermwood
Re: LDE problem with latest upgrade
From the picture, it looks like the cabinet is ever so slightly rotated. If you do a reset view on the cabinet, does the extra lines go away?
Rick Deskins
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
-
- Guru Member
- Posts: 833
- Joined: Thu, May 14 2009, 11:41PM
- Company Name: Diamond Lake Custom Woodworks
- Location: Newport, WA
- Contact:
Re: LDE problem with latest upgrade
Rick,
How would the cabinet get slightly rotated? All I did was bring it in from CE and set Page Setup to landscape mode. Then resized the cabinet to fit in the page. Then hide all the parts I needed to to get to just the faceframe for measurements. Kinda confused on that.
How would the cabinet get slightly rotated? All I did was bring it in from CE and set Page Setup to landscape mode. Then resized the cabinet to fit in the page. Then hide all the parts I needed to to get to just the faceframe for measurements. Kinda confused on that.
Sincerely,
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
-
- Thermwood Team
- Posts: 857
- Joined: Tue, May 17 2005, 12:47PM
- Company Name: Thermwood
- Country: UNITED STATES
- Location: Thermwood
Re: LDE problem with latest upgrade
Not sure, unless it was done accidentally and the rotation was not enough to notice.
Rick Deskins
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
-
- eCabinets Beta Tester
- Posts: 1740
- Joined: Tue, May 17 2005, 8:33PM
- Company Name: Timeless Cabinetry and Mantles
- Location: South East
Re: LDE problem with latest upgrade
Hey Donald,
I've done the same thing before. In fact it happens more often if you "resize" the object for some reason. It doesn't take but a smidgen of a rotate to cause this.
Try opening the cabinet into CE again, and bringing it back into LDE. RE-size it, and press HOME. THEN try your dimensions again.
Not trying to hijack your assistance here,
I've done the same thing before. In fact it happens more often if you "resize" the object for some reason. It doesn't take but a smidgen of a rotate to cause this.
Try opening the cabinet into CE again, and bringing it back into LDE. RE-size it, and press HOME. THEN try your dimensions again.
Not trying to hijack your assistance here,
Intel Core i7-5820K (6-Cores, 3.3GHz, 15MB Cache)
32Gigs DDR4
NVIDIA GeForce GTX 960 4GB
SSD 840 256Gig, 2TB, 3TB, Samsung (2TB)
Corsair RM650
32Gigs DDR4
NVIDIA GeForce GTX 960 4GB
SSD 840 256Gig, 2TB, 3TB, Samsung (2TB)
Corsair RM650