eCabinets 6.1 crashes when exporting display object or assem

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Scott Marshburn
Guru Member
Posts: 837
Joined: Sat, Mar 05 2011, 7:29AM
Company Name: Heritage WoodWorks
Country: UNITED STATES
Location: Jacksonville Nc
Contact:

eCabinets 6.1 crashes when exporting display object or assem

Post by Scott Marshburn »

Does anyone else have this issue?
In the cabinet editor. Load a display object or an assembly select it and under file click on export selection. eCabinets crashes every time.
Scott Marshburn
Guru Member
Posts: 837
Joined: Sat, Mar 05 2011, 7:29AM
Company Name: Heritage WoodWorks
Country: UNITED STATES
Location: Jacksonville Nc
Contact:

Re: eCabinets 6.1 crashes when exporting display object or a

Post by Scott Marshburn »

Ok. I tried running the repair but I still get the same thing. eCabinets crashes every time I try to export anything as an hsf file. Does anyone get the same thing when they do this?
tim lucas
Guru Member
Posts: 322
Joined: Thu, Nov 29 2007, 5:18PM
Company Name: Tim Lucas Custom Woodworks LLC
Country: UNITED STATES
Location: bell, florida
Contact:

Re: eCabinets 6.1 crashes when exporting display object or a

Post by tim lucas »

Scott, yes

I loaded a room selected a display item clicked file, export and it crashed.
sent error report

Tim
Tim Lucas Custom Woodworks LLC
www.TLCW.us
Jeremy Schiffer
eCabinets Beta Tester
Posts: 1119
Joined: Tue, May 10 2005, 9:36PM
Company Name: Corlane Custom Cabinetry LLC
Country: UNITED STATES
Location: Carnesville, GA
Contact:

Re: eCabinets 6.1 crashes when exporting display object or a

Post by Jeremy Schiffer »

Same here. This is a feature I've almost never used, so it slipped through my beta fingers...
http://www.corlanecabinetry.com

Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
Rick Deskins
Thermwood Team
Posts: 857
Joined: Tue, May 17 2005, 12:47PM
Company Name: Thermwood
Country: UNITED STATES
Location: Thermwood

Re: eCabinets 6.1 crashes when exporting display object or a

Post by Rick Deskins »

I have reproduced the issue. I will get it listed and fixed. Thanks.
Rick Deskins
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
Chris Armstrong
Junior Member
Posts: 69
Joined: Tue, May 19 2015, 7:44PM
Company Name: Classic Cabinetry
Country: AUSTRALIA

Re: eCabinets 6.1 crashes when exporting display object or a

Post by Chris Armstrong »

i have this same issue, both times i went to export job to the machine to cut it crashed then when i reloaded the saved esj file and exported again it sent through without a hitch
Post Reply