How did I screw this up. Main job view reduced to 1/10
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Senior Member
- Posts: 118
- Joined: Sun, Oct 19 2014, 8:33PM
- Company Name: Frank Raffaele and Sons Custom
- Country: UNITED STATES
How did I screw this up. Main job view reduced to 1/10
Don't know what i did but spent two days working on a job and when switching between render/overhead views I somehow reduced the job to the size of a quarter and I must have saved it that way. Any idea what I did and anyway to correct the problem.
-
- Senior Member
- Posts: 218
- Joined: Thu, May 19 2005, 10:24AM
Re: How did I screw this up. Main job view reduced to 1/10
It seems to me that I had that happen once and as I recall I had placed a cabinet, or maybe another smaller object and it went way out into the perimeter outside the kitchen. Look around and see if you can find an object or something that you tried to place.
-
- Thermwood Team
- Posts: 698
- Joined: Fri, May 15 2015, 1:21PM
- Company Name: Thermwood Corp
- Country: UNITED STATES
Re: How did I screw this up. Main job view reduced to 1/10
I agree with Terry. You can make it a little easier on yourself by left clicking and dragging the selection box in the open space around the room. After drawing the box, hit the delete key on the keyboard. Then check by hitting home on the keyboard to see if the room recenters.
-Clint-
-Clint-
-
- Senior Member
- Posts: 118
- Joined: Sun, Oct 19 2014, 8:33PM
- Company Name: Frank Raffaele and Sons Custom
- Country: UNITED STATES
Re: How did I screw this up. Main job view reduced to 1/10
Terry you seem to be correct. Before I read your reply I saw a dishwasher at the far corner of the screen and I assumed that was the problem. But for some reason I was having trouble deleting it. Somehow I managed to fix the problem similar to what Clint suggested. Thanks guys.