Wasteboard minimum thickness
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Jim Bullis
-
- eCabinets Beta Tester
- Posts: 1119
- Joined: Tue, May 10 2005, 9:36PM
- Company Name: Corlane Custom Cabinetry LLC
- Country: UNITED STATES
- Location: Carnesville, GA
- Contact:
Wasteboard minimum thickness
Using THM 9.1.2, the flycut program, which is amazing in every other respect, is telling me the minimum thickness allowed for the wasteboard is 4.318mm. Why the limitation, and more importantly, how can I bypass it, or set it to a more reasonable value? (a wasteboard that starts off at 6mm and cannot go below 4.318mm lasts about 1 day.)
http://www.corlanecabinetry.com
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
-
- Wizard Member
- Posts: 4722
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: Wasteboard minimum thickness
Jeremy,
If the wasteboard gets too thin it allows too much air through and affects hold down.
that being said I changed ours from the .17" to .15 and I get a little more life out of the board.
You change it in the THM.ini file
If the wasteboard gets too thin it allows too much air through and affects hold down.
that being said I changed ours from the .17" to .15 and I get a little more life out of the board.
You change it in the THM.ini file
-
- eCabinets Beta Tester
- Posts: 1119
- Joined: Tue, May 10 2005, 9:36PM
- Company Name: Corlane Custom Cabinetry LLC
- Country: UNITED STATES
- Location: Carnesville, GA
- Contact:
Re: Wasteboard minimum thickness
Thanks!
http://www.corlanecabinetry.com
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12
Intel Core i7-5820 3.3GHz, 16GB RAM, NVidia Quadro K2200 4GB, Windows 8.1 Pro 64 bit
CS-41 4x8
CS-45 5x12