Part editor cuts with bottom inset on end

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Mark McCallum
Guru Member
Posts: 507
Joined: Thu, Jun 16 2005, 7:53PM
Location: Sydney Aust

Part editor cuts with bottom inset on end

Post by Mark McCallum »

This is a interesting result when there already part editor cuts, then a bottom insert is applied to the bottom of 1 end,
It seems to be the same for unconstrained and constrained cuts

Also if you have constraints applied and you try to edit them in the Constraints manager it doesn't work properly
Its probably not a very common scenario, and when you think about it gets complicated whether the kick should just be removed from the bottom if there are no restraints, or remove the cuts then add the insets or other scenarios.
Attachments
Toe kick restraints question1.JPG
Toe kick restraints question2.JPG
Clint Buechlein
Thermwood Team
Posts: 696
Joined: Fri, May 15 2015, 1:21PM
Company Name: Thermwood Corp
Country: UNITED STATES

Re: Part editor cuts with bottom inset on end

Post by Clint Buechlein »

Mark,

We have seen this issue, and it will be corrected in the next release of eCabinets. The next release should be coming shortly, as there are other issues we need to correct. Thanks for letting us know though.

Clint
Post Reply