rotate object

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Mike Lew
Junior Member
Posts: 26
Joined: Thu, Feb 08 2007, 8:34PM

rotate object

Post by Mike Lew »

When I highlight a part and want to rotate it, shouldn't the curved yellow arrow icon work for this?
tim lucas
Guru Member
Posts: 322
Joined: Thu, Nov 29 2007, 5:18PM
Company Name: Tim Lucas Custom Woodworks LLC
Country: UNITED STATES
Location: bell, florida
Contact:

Re: rotate object

Post by tim lucas »

Yes if you have it selected it should work. If you click on a part of a cabinet it might not - to know for sure, select the item then right click on the screen, is the "Rotate" faded or is it available ? If it is available then the yellow arrow should work
Tim Lucas Custom Woodworks LLC
www.TLCW.us
Mike Lew
Junior Member
Posts: 26
Joined: Thu, Feb 08 2007, 8:34PM

Re: rotate object

Post by Mike Lew »

Rotate is grayed out. Why would that be?
tim lucas
Guru Member
Posts: 322
Joined: Thu, Nov 29 2007, 5:18PM
Company Name: Tim Lucas Custom Woodworks LLC
Country: UNITED STATES
Location: bell, florida
Contact:

Re: rotate object

Post by tim lucas »

Mike Lewandowski wrote:Rotate is grayed out. Why would that be?
You are trying to rotate something that can't be rotated, like a door or drawer front - if you need to rotate one of these you will have to create it from a display door or drawer front then it will rotate.

Hope this helps
Tim
Tim Lucas Custom Woodworks LLC
www.TLCW.us
Post Reply