Trying to modify a hutch lower section from 24" deep to 18" deep and cabinet editor tells me it results in an unworkable mid stile
I cant seem to edit anything (the top or the inset of the top rail) without it having the same error
tried to upload the cabinet but its to big
Also I keep having to add the same material over and over, is anyone else having this problem??
Unworkable mid stile
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Guru Member
- Posts: 322
- Joined: Thu, Nov 29 2007, 5:18PM
- Company Name: Tim Lucas Custom Woodworks LLC
- Country: UNITED STATES
- Location: bell, florida
- Contact:
Unworkable mid stile
Tim Lucas Custom Woodworks LLC
www.TLCW.us
www.TLCW.us
-
- Guru Member
- Posts: 640
- Joined: Tue, Jan 16 2007, 7:56PM
- Company Name: LRG WoodCrafting
- Location: Windsor Locks, CT
- Contact:
Re: Unworkable mid stile
Uploading the cabinet shouldn't be a problem. It's possible a cabinet part is corrupt.
If you have applied any constraints on parts that might stop it from resizing properly. If you have a part editor cuts that could corrupt the cabinet. If there are part editor cuts remove them and then re-size the cabinet and reapply the cuts.
If you have applied any constraints on parts that might stop it from resizing properly. If you have a part editor cuts that could corrupt the cabinet. If there are part editor cuts remove them and then re-size the cabinet and reapply the cuts.
Dell Precision 7710
Intel Core i7-6820HQ @ 2.70GHz 16.00 GB RAM
NVIDIA Quadro M3000M
512 GB PCIe NVMe - M.2 SSD
Win 7 Pro 64-bit
http://lrgwood.com
Intel Core i7-6820HQ @ 2.70GHz 16.00 GB RAM
NVIDIA Quadro M3000M
512 GB PCIe NVMe - M.2 SSD
Win 7 Pro 64-bit
http://lrgwood.com