I am a fairly novice user of E-cab and have reviewed several of the videos as well as reviewed the help documentation. I am missing something while trying to modify a seed cabinet. The modified cabinet is 46 wide x 94 tall x 18 deep. No toe kick but has a face frame. The face frame is 2 inches wide 3/4 board stock and the bottom rail has been changed to 3 1/2 inches. Once the bottom rail is changed from 2 to 3.5 the sides and back do not increase in length to follow the face frame. Have tried two different seed cabinets in cabinet editor with the same results. I would appreciated someone pointing me towards a video or a help topic that would guide me in the correct direction.
Regards,
Richard
Face Frame/Cabinet Height Problem
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- New Member
- Posts: 3
- Joined: Sat, Feb 06 2016, 10:31AM
- Company Name: OBriens Custom Cabinets LLC
- Country: UNITED STATES
- Location: Vanceboro,NC
-
- Senior Member
- Posts: 218
- Joined: Thu, May 19 2005, 10:24AM
Re: Face Frame/Cabinet Height Problem
As I recall Richard, you have to change the deck inset when you change the bottom rail width. Play with it a little bit and I believe that will solve your problem.
-
- Guru Member
- Posts: 837
- Joined: Sat, Mar 05 2011, 7:29AM
- Company Name: Heritage WoodWorks
- Country: UNITED STATES
- Location: Jacksonville Nc
- Contact:
Re: Face Frame/Cabinet Height Problem
Hi Richard,
Here is a video that I have on how to get the bottom inset for you deck to automatically adjust.
https://www.youtube.com/watch?v=BL-d8Ea ... 5HomRGZb0U
Here is a video that I have on how to get the bottom inset for you deck to automatically adjust.
https://www.youtube.com/watch?v=BL-d8Ea ... 5HomRGZb0U
Yes! Oh Yes! I Think We Are Going to make It!
https://www.youtube.com/user/ecabinetstips
https://www.facebook.com/groups/397563664342467
https://www.youtube.com/user/ecabinetstips
https://www.facebook.com/groups/397563664342467
-
- New Member
- Posts: 3
- Joined: Sat, Feb 06 2016, 10:31AM
- Company Name: OBriens Custom Cabinets LLC
- Country: UNITED STATES
- Location: Vanceboro,NC
Re: Face Frame/Cabinet Height Problem
Terry and Scott,
Thanks for the guidance. Your advice was dead on. Viewed Scotts video – nice work thanks for your efforts. Changing the deck bottom inset was leading me in the right direction. Had missed that the deck is referenced to the bottom without a toe kick. Once this was applied the sides and back still did not go to the bottom of the cabinet. Changed the bottom insets for the back and sides under construction settings which lengthened the items as needed. Still a bit fuzzy on what controls the overall length of the sides/back to match the overall length of the face frames. Back to the training videos!
Regards,
Richard
Thanks for the guidance. Your advice was dead on. Viewed Scotts video – nice work thanks for your efforts. Changing the deck bottom inset was leading me in the right direction. Had missed that the deck is referenced to the bottom without a toe kick. Once this was applied the sides and back still did not go to the bottom of the cabinet. Changed the bottom insets for the back and sides under construction settings which lengthened the items as needed. Still a bit fuzzy on what controls the overall length of the sides/back to match the overall length of the face frames. Back to the training videos!
Regards,
Richard