changing rendering color 1 side

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Mike Lew
Junior Member
Posts: 26
Joined: Thu, Feb 08 2007, 8:34PM

changing rendering color 1 side

Post by Mike Lew »

I have a customer that wants to see color changes frequently. Is there a way to change the color on just 1 side of a display cube?
tim lucas
Guru Member
Posts: 322
Joined: Thu, Nov 29 2007, 5:18PM
Company Name: Tim Lucas Custom Woodworks LLC
Country: UNITED STATES
Location: bell, florida
Contact:

Re: changing rendering color 1 side

Post by tim lucas »

Mike, if it is just the cube, I don't think you can change 1 side
but if it is the cabinets or walls - right click on the room and select modify textures

Tim
Tim Lucas Custom Woodworks LLC
www.TLCW.us
Mike Lew
Junior Member
Posts: 26
Joined: Thu, Feb 08 2007, 8:34PM

Re: changing rendering color 1 side

Post by Mike Lew »

Yes Tim, it's just the display cube. Too bad there wasn't a "copy & paste" for colors, wood-grains, etc.
tim lucas
Guru Member
Posts: 322
Joined: Thu, Nov 29 2007, 5:18PM
Company Name: Tim Lucas Custom Woodworks LLC
Country: UNITED STATES
Location: bell, florida
Contact:

Re: changing rendering color 1 side

Post by tim lucas »

Mike

I added a 12" square display cube to a room and gave it a cherry wood texture - to change the color in the room while in render mood just right click the mouse and select Modify Texture then select whatever color you need then render again
Capture.PNG
Hope this helps a little
Tim
Tim Lucas Custom Woodworks LLC
www.TLCW.us
Mike Lew
Junior Member
Posts: 26
Joined: Thu, Feb 08 2007, 8:34PM

Re: changing rendering color 1 side

Post by Mike Lew »

Thanks Tim, I have a commercial laminate column they want different colors on each side.
tim lucas
Guru Member
Posts: 322
Joined: Thu, Nov 29 2007, 5:18PM
Company Name: Tim Lucas Custom Woodworks LLC
Country: UNITED STATES
Location: bell, florida
Contact:

Re: changing rendering color 1 side

Post by tim lucas »

Mike Lew wrote:Thanks Tim, I have a commercial laminate column they want different colors on each side.
I would make it out of a cabinet using 4 different sheet goods and then you can still use the texture modify and change each side to what you want
Tim Lucas Custom Woodworks LLC
www.TLCW.us
Post Reply