Partition/Shelf Openings

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Jon Forsgren
Junior Member
Posts: 72
Joined: Wed, May 18 2005, 9:12AM
Location: Camano Island, WA

Partition/Shelf Openings

Post by Jon Forsgren »

I have a wide, tall cabinet--56W X93H. I have put a partition down the center. then added a fixed shelf in one side. When I go to add another fixed shelf to the same side, it picks an opening the full width of the cab not just the one side . It ignores the partition and makes a full with shelf. I can not pick any single new opening I created. No associations, or locks. Also I when I try to pick a part/shelf to delete, it describes the part but picks the whole opening. If I zoom in real tight I can pick the need part.

Thanks, Jon
Attachments
cabProb2.jpg
cabProb.jpg
David Egnoski
Senior Member
Posts: 209
Joined: Tue, May 17 2005, 1:05PM
Company Name: Richmond Cabinet
Country: UNITED STATES
Location: Delavan, WI

Re: Partition/Shelf Openings

Post by David Egnoski »

Jon,

Post the cabinet and I'm sure someone here can help.
Dave Egnoski
Richmond Cabinet & Millwork
Jon Forsgren
Junior Member
Posts: 72
Joined: Wed, May 18 2005, 9:12AM
Location: Camano Island, WA

Re: Partition/Shelf Openings

Post by Jon Forsgren »

I forget what file to post. Just the one cab file in the correct directory?

Thanks
Jon Forsgren
Junior Member
Posts: 72
Joined: Wed, May 18 2005, 9:12AM
Location: Camano Island, WA

Re: Partition/Shelf Openings

Post by Jon Forsgren »

I think I did this right
Attachments
LgPantryWideMicro.hsf
(552.02 KiB) Downloaded 375 times
Scott Marshburn
Guru Member
Posts: 837
Joined: Sat, Mar 05 2011, 7:29AM
Company Name: Heritage WoodWorks
Country: UNITED STATES
Location: Jacksonville Nc
Contact:

Re: Partition/Shelf Openings

Post by Scott Marshburn »

Hi, Jon. am not sure what is going on. I downloaded the cabinet. I took it to the shelf/partition editor and got the same results. when I tried to select the partition it would not highlight. I had to use ctrl-A to get it selected. however, when I deleted it and added it back everything seemed to work as expected. ( I could select the left or right opening. So I added a fixed shelf to the left opening. now when I select the right opening with the cursor above the shelf, it selects the left and right opening above the shelf ignoring the partition. only now when I select the left opening it selects the entire left opening ignoring the shelf.
Jon Forsgren
Junior Member
Posts: 72
Joined: Wed, May 18 2005, 9:12AM
Location: Camano Island, WA

Re: Partition/Shelf Openings

Post by Jon Forsgren »

I tried the repair option. No Joy. Also when I try to resize an opening in face frame. I input the dimension, hit enter, and the number stays blue highlighted and does nothing. Everything has worked great before with all update, even the latest. This just started happening. I am going to try another computer and see, but looks like a repeatable problem. Also going to try recreating cab.

Thanks for the help! Jon
Scott Marshburn
Guru Member
Posts: 837
Joined: Sat, Mar 05 2011, 7:29AM
Company Name: Heritage WoodWorks
Country: UNITED STATES
Location: Jacksonville Nc
Contact:

Re: Partition/Shelf Openings

Post by Scott Marshburn »

Hi Jon, Have you had any luck? Please keep us posted on this
Jon Forsgren
Junior Member
Posts: 72
Joined: Wed, May 18 2005, 9:12AM
Location: Camano Island, WA

Re: Partition/Shelf Openings

Post by Jon Forsgren »

Sorry 'bout that. Seems there was something (can't find what) about that cabinet. Had another one using that one as a ""seed" and had the same problem. Started fresh with a new cabinet and all seems to work right. I had deleted all internal components, deleted FF, resized, refreshed, resaved, etc. Nothing fixed it.

Should be okay now. Still would be interested on why it happened.

Jon
Jason Gooch
Guru Member
Posts: 533
Joined: Thu, Jun 23 2005, 12:26AM
Location: San Francisco

Re: Partition/Shelf Openings

Post by Jason Gooch »

I have consistently been having the same issue. I add a partition or shelf (fixed or adjustable), then am unable to select the space above or below and adjust heights. If I zoom in I can select the shelf itself, and can then manually move it, but cannot enter values in height box to move it up or down. Of course this is happening with all my seed cabinets - if I use Standard Cabinets it seems to operate just fine.

Help?
Applebox Cabinetry and Furniture
www.appleboxwood.com
Mark McCallum
Guru Member
Posts: 507
Joined: Thu, Jun 16 2005, 7:53PM
Location: Sydney Aust

Re: Partition/Shelf Openings

Post by Mark McCallum »

I think I had this happen as well on some cabinets when testing the beta.
I mixed it up with some other questions and wasn't really sure what as happening anyway.
But here is a link to the topic in the beta if it is of any use
http://www.thermwood.com/forums/viewtop ... =9&t=15865
Post Reply