Hardware pattern Global Modification

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
David Giesbrecht
Junior Member
Posts: 85
Joined: Thu, Mar 03 2011, 10:40PM
Company Name: Silverpine Cabinets
Country: CANADA

Hardware pattern Global Modification

Post by David Giesbrecht »

Hi I had several cabinets that needed a different slide pattern, I selected them and went through the Global Mods procedure. Now when I go into the cabinet the default slide is changed but I have to select the fronts and apply hardware. Is this how it is supposed to work or am I missing some check box to apply it somewhere?
David Giesbrecht
Inter(R) Core(TM) i7-7700CPU OC@ 4.8 GHz
8.00 GB DDR5 2133MHz
NVIDIA GeForce GTX 970 4GB
Z270x-Gaming 5 MOBO
1TB Samsung 960PRO SSD
Forrest Chapman
eCabinets Beta Tester
Posts: 1230
Joined: Mon, May 30 2005, 2:26PM
Location: Anderson SC.
Contact:

Re: Hardware pattern Global Modification

Post by Forrest Chapman »

Make sure the cabinets to be changed are highlighted.

Forrest
David Giesbrecht
Junior Member
Posts: 85
Joined: Thu, Mar 03 2011, 10:40PM
Company Name: Silverpine Cabinets
Country: CANADA

Re: Hardware pattern Global Modification

Post by David Giesbrecht »

Yes the pattern default changes but the actual hole pattern doesn't apply.
David Giesbrecht
Inter(R) Core(TM) i7-7700CPU OC@ 4.8 GHz
8.00 GB DDR5 2133MHz
NVIDIA GeForce GTX 970 4GB
Z270x-Gaming 5 MOBO
1TB Samsung 960PRO SSD
Post Reply