Is there a way to make doors with sheet stock panels ?
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- New Member
- Posts: 24
- Joined: Tue, Oct 24 2017, 1:40PM
- Company Name: woodland Kitchens NH
- Country: UNITED STATES
Is there a way to make doors with sheet stock panels ?
Hello all, I am still new to eCabs. Can someone direct me to how I would setup a door so that it's made from a sheet stock panel?
-
- Guru Member
- Posts: 322
- Joined: Thu, Nov 29 2007, 5:18PM
- Company Name: Tim Lucas Custom Woodworks LLC
- Country: UNITED STATES
- Location: bell, florida
- Contact:
Re: Is there a way to make doors with sheet stock panels ?
Welcome Andy,
Yes you can by creating a board stock item with the same specs as sheet stock.
Tim
Yes you can by creating a board stock item with the same specs as sheet stock.
Tim
Tim Lucas Custom Woodworks LLC
www.TLCW.us
www.TLCW.us
-
- Senior Member
- Posts: 157
- Joined: Fri, Apr 10 2015, 7:57AM
- Company Name: Bergman Custom Casework LLC
- Country: UNITED STATES
Re: Is there a way to make doors with sheet stock panels ?
Andy, Start by going to the door and drawer front designer using the button in the toolbar, then select the tab for the component you wish to design, door or front. use the source drop down bar to select slab. Go to the standard directory, then select the standard slab. Use the input fields to select the material and give it a name you can be familiar with. no when you apply doors or fronts you may select this option to put on your cabinets.
_____________
Win 10 Pro 64 bit on MSI Z390M Pro4
Intel core i7 9700KF 3.6GHz (OC 4.2Ghz)
32 gig RAM, NVIDIA GeForce GTX 1050 Ti
NVME SSM2HD 1TB NTFS
Win 10 Pro 64 bit on MSI Z390M Pro4
Intel core i7 9700KF 3.6GHz (OC 4.2Ghz)
32 gig RAM, NVIDIA GeForce GTX 1050 Ti
NVME SSM2HD 1TB NTFS
-
- New Member
- Posts: 24
- Joined: Tue, Oct 24 2017, 1:40PM
- Company Name: woodland Kitchens NH
- Country: UNITED STATES
Re: Is there a way to make doors with sheet stock panels ?
Thanks for the answers all! I am guessing you can't get a layout of the best way to cut the panels from a 4' X 8' sheet good like you can for all of the other parts of a cabinet ? seems a bit strange but ill go with it
-
- Guru Member
- Posts: 559
- Joined: Wed, May 18 2005, 6:59PM
- Company Name: CNC Automation
- Country: CANADA
- Location: St. Zotique, Québec, Canada
- Contact:
Re: Is there a way to make doors with sheet stock panels ?
Andy,
If you use Stuart Douglas' instructions, you should be able to get what you need.
If you use Stuart Douglas' instructions, you should be able to get what you need.
-
- Senior Member
- Posts: 157
- Joined: Fri, Apr 10 2015, 7:57AM
- Company Name: Bergman Custom Casework LLC
- Country: UNITED STATES
Re: Is there a way to make doors with sheet stock panels ?
If your doors and fronts are all the same material they will nest together on a sheet. Be sure to set the defaults so that your fronts and doors are always the same material. You can specify if your material has grain, and if the parts need to be contiguous (matched grain). to keep things correctly laid out while maximizing the sheet yield.andy photenas wrote:Thanks for the answers all! I am guessing you can't get a layout of the best way to cut the panels from a 4' X 8' sheet good like you can for all of the other parts of a cabinet ? seems a bit strange but ill go with it
_____________
Win 10 Pro 64 bit on MSI Z390M Pro4
Intel core i7 9700KF 3.6GHz (OC 4.2Ghz)
32 gig RAM, NVIDIA GeForce GTX 1050 Ti
NVME SSM2HD 1TB NTFS
Win 10 Pro 64 bit on MSI Z390M Pro4
Intel core i7 9700KF 3.6GHz (OC 4.2Ghz)
32 gig RAM, NVIDIA GeForce GTX 1050 Ti
NVME SSM2HD 1TB NTFS
-
- Guru Member
- Posts: 367
- Joined: Thu, May 19 2005, 7:50PM
- Company Name: Fancyridge Wood Products LLC
- Location: Greensburg, Ky
Re: Is there a way to make doors with sheet stock panels ?
I believe Andy is wanting a 5pc. flat panel door with hardwood rails and plywood for the panel.
-
- Guru Member
- Posts: 322
- Joined: Thu, Nov 29 2007, 5:18PM
- Company Name: Tim Lucas Custom Woodworks LLC
- Country: UNITED STATES
- Location: bell, florida
- Contact:
Re: Is there a way to make doors with sheet stock panels ?
Here is a slab door cabinet that will nest with the cabinet parts - all 3/4 plywood
TimTim Lucas Custom Woodworks LLC
www.TLCW.us
www.TLCW.us
-
- New Member
- Posts: 24
- Joined: Tue, Oct 24 2017, 1:40PM
- Company Name: woodland Kitchens NH
- Country: UNITED STATES
Re: Is there a way to make doors with sheet stock panels ?
Thanks to all that help answer, I was so spun i did not ask this right and yes I am trying to make 5 piece doors with plywood panel. I am sorry for such a poor question and ty all for the help.