Countertop - Over a Corner Cabinet

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Travis Black
New Member
Posts: 20
Joined: Wed, Jan 16 2013, 11:38PM
Company Name: Serenity Construction Inc.
Country: UNITED STATES

Countertop - Over a Corner Cabinet

Post by Travis Black »

I have a drawing where I have a corner cabinet that has been associated to the main wall #2, but will not show in the countertop page. It does show in all other pages, just not in the countertop page. Any ideas?

Attached is a picture. I would like the countertop to go around the corner.
Attachments
Kitchen Countertop View.jpg
Kitchen.jpg
tim lucas
Guru Member
Posts: 322
Joined: Thu, Nov 29 2007, 5:18PM
Company Name: Tim Lucas Custom Woodworks LLC
Country: UNITED STATES
Location: bell, florida
Contact:

Re: Countertop - Over a Corner Cabinet

Post by tim lucas »

I don't select a wall when I go to countertops, I just go - maybe that is why its not showing ????

Tim
Tim Lucas Custom Woodworks LLC
www.TLCW.us
Travis Black
New Member
Posts: 20
Joined: Wed, Jan 16 2013, 11:38PM
Company Name: Serenity Construction Inc.
Country: UNITED STATES

Re: Countertop - Over a Corner Cabinet

Post by Travis Black »

I thought about that, but does not work either. I have tried just about everything, including shutting down the software and re-starting it. Nothing seems to work.
tim lucas
Guru Member
Posts: 322
Joined: Thu, Nov 29 2007, 5:18PM
Company Name: Tim Lucas Custom Woodworks LLC
Country: UNITED STATES
Location: bell, florida
Contact:

Re: Countertop - Over a Corner Cabinet

Post by tim lucas »

That is strange, have you tried to delete the cabinet then put it back in??

What about a new room with just one wall and that one cabinet??
Tim Lucas Custom Woodworks LLC
www.TLCW.us
Travis Black
New Member
Posts: 20
Joined: Wed, Jan 16 2013, 11:38PM
Company Name: Serenity Construction Inc.
Country: UNITED STATES

Re: Countertop - Over a Corner Cabinet

Post by Travis Black »

Yeah, just tried a new wall with just that single cabinet, and it shows up everywhere except the countertop page. I have no clue.
tim lucas
Guru Member
Posts: 322
Joined: Thu, Nov 29 2007, 5:18PM
Company Name: Tim Lucas Custom Woodworks LLC
Country: UNITED STATES
Location: bell, florida
Contact:

Re: Countertop - Over a Corner Cabinet

Post by tim lucas »

can you upload the cabinet
Tim Lucas Custom Woodworks LLC
www.TLCW.us
Travis Black
New Member
Posts: 20
Joined: Wed, Jan 16 2013, 11:38PM
Company Name: Serenity Construction Inc.
Country: UNITED STATES

Re: Countertop - Over a Corner Cabinet

Post by Travis Black »

here you go.
Attachments
Base - Corner - 24x34.5x24.hsf
(492.02 KiB) Downloaded 362 times
tim lucas
Guru Member
Posts: 322
Joined: Thu, Nov 29 2007, 5:18PM
Company Name: Tim Lucas Custom Woodworks LLC
Country: UNITED STATES
Location: bell, florida
Contact:

Re: Countertop - Over a Corner Cabinet

Post by tim lucas »

It shows it is an upper cabinet not a base. I can upload one if you need it

Tim
Tim Lucas Custom Woodworks LLC
www.TLCW.us
Travis Black
New Member
Posts: 20
Joined: Wed, Jan 16 2013, 11:38PM
Company Name: Serenity Construction Inc.
Country: UNITED STATES

Re: Countertop - Over a Corner Cabinet

Post by Travis Black »

Is there a way to change from Upper to Base?
tim lucas
Guru Member
Posts: 322
Joined: Thu, Nov 29 2007, 5:18PM
Company Name: Tim Lucas Custom Woodworks LLC
Country: UNITED STATES
Location: bell, florida
Contact:

Re: Countertop - Over a Corner Cabinet

Post by tim lucas »

No, from what I read you can mimic a base with an upper and I have before, but there is no way to change it.
Tim Lucas Custom Woodworks LLC
www.TLCW.us
Travis Black
New Member
Posts: 20
Joined: Wed, Jan 16 2013, 11:38PM
Company Name: Serenity Construction Inc.
Country: UNITED STATES

Re: Countertop - Over a Corner Cabinet

Post by Travis Black »

Ok, I will see if I can find a corner base cabinet. Seems odd that you would not be able to change the type.
Post Reply