Ok, stupid question....

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Donald Thomson
Guru Member
Posts: 833
Joined: Thu, May 14 2009, 11:41PM
Company Name: Diamond Lake Custom Woodworks
Location: Newport, WA
Contact:

Ok, stupid question....

Post by Donald Thomson »

I just spent over an hour carefully adding and positioning display boards to a cabinet. I saved the cabinet then saved the changes to the batch that the cabinet resides in. When I bring the cabinet into cabinet editor from the batch, all that work is gone :fire:

All that work is gone and I've wasted a bunch of time. :wall:

What do I have to do to keep it intact with the cabinet? Thank you.
Attachments
Master vanity.hsf
(1.39 MiB) Downloaded 324 times
Brought in from batch to edit UGHHHHH
Brought in from batch to edit UGHHHHH
After all my hard work
After all my hard work
Sincerely,

Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
tim lucas
Guru Member
Posts: 322
Joined: Thu, Nov 29 2007, 5:18PM
Company Name: Tim Lucas Custom Woodworks LLC
Country: UNITED STATES
Location: bell, florida
Contact:

Re: Ok, stupid question....

Post by tim lucas »

You need to associate the display panels to the cabinet for them to stay

Tim
Tim Lucas Custom Woodworks LLC
www.TLCW.us
Carmen Addamo
Senior Member
Posts: 118
Joined: Sun, Oct 19 2014, 8:33PM
Company Name: Frank Raffaele and Sons Custom
Country: UNITED STATES

Re: Ok, stupid question....

Post by Carmen Addamo »

Yes, as tim said, you must associate all display parts to a cabinet. Click on and highlight the display part. Double click on the cabinet. Right click to access the drop down menu and click on associate to cabinet.
Donald Thomson
Guru Member
Posts: 833
Joined: Thu, May 14 2009, 11:41PM
Company Name: Diamond Lake Custom Woodworks
Location: Newport, WA
Contact:

Re: Ok, stupid question....

Post by Donald Thomson »

Thank you!! I was not aware that that had to be done. So I'm guessing that all the work I did is now part of the great bit-bucket in the sky?? :roll:
Sincerely,

Don Thomson
Diamond Lake Custom Woodworks, LLC
509-671-6230
Newport, WA
http://www.dlwoodworks.com
tim lucas
Guru Member
Posts: 322
Joined: Thu, Nov 29 2007, 5:18PM
Company Name: Tim Lucas Custom Woodworks LLC
Country: UNITED STATES
Location: bell, florida
Contact:

Re: Ok, stupid question....

Post by tim lucas »

Donald Thomson wrote:Thank you!! I was not aware that that had to be done. So I'm guessing that all the work I did is now part of the great bit-bucket in the sky?? :roll:
Yes

and the Great Bit Bucket Master thanks you for your contribution :)

Tim
Tim Lucas Custom Woodworks LLC
www.TLCW.us
Post Reply