Edit Depth not working in Constraint Manager

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

Post Reply
Joe Soto
Guru Member
Posts: 367
Joined: Thu, May 19 2005, 7:50PM
Company Name: Fancyridge Wood Products LLC
Location: Greensburg, Ky

Edit Depth not working in Constraint Manager

Post by Joe Soto »

Not a big deal, Edit/Edit Depth button doesn't seem to be working. Can't select anything. But Edit/ Edit Constraint will let you select depth or constraints.
Mark McCallum
Guru Member
Posts: 507
Joined: Thu, Jun 16 2005, 7:53PM
Location: Sydney Aust

Re: Edit Depth not working in Constraint Manager

Post by Mark McCallum »

Hi Joe
I get the same results.
Its like its meant to work that way. :D
Clint Buechlein
Thermwood Team
Posts: 696
Joined: Fri, May 15 2015, 1:21PM
Company Name: Thermwood Corp
Country: UNITED STATES

Re: Edit Depth not working in Constraint Manager

Post by Clint Buechlein »

Seems to be working ok for me. To make sure everyone is using it correctly:

- If there is a depth constraint, you cannot use Edit Depth.
- If there is no depth constraint, you are not selecting a node, you just need to click on the geometry.

-Clint-
Ian Richardson
Junior Member
Posts: 76
Joined: Fri, Feb 15 2013, 5:21PM
Company Name: Millworx
Country: CANADA

Re: Edit Depth not working in Constraint Manager

Post by Ian Richardson »

oooooh! Ive been clicking 0.25 and edit constraint. Been wondering why edit depth never worked :beer:
Attachments
DEPTH.PNG
DEPTH.PNG (9.2 KiB) Viewed 8989 times
Mark McCallum
Guru Member
Posts: 507
Joined: Thu, Jun 16 2005, 7:53PM
Location: Sydney Aust

Re: Edit Depth not working in Constraint Manager

Post by Mark McCallum »

If there is a depth constraint, you cannot use Edit Depth.
- If there is no depth constraint, you are not selecting a node, you just need to click on the geometry.
So if there is a constraint already just click on the constraint?
I seem to remember that it worked like Joe described before.?

https://vimeo.com/372189089
Clint Buechlein
Thermwood Team
Posts: 696
Joined: Fri, May 15 2015, 1:21PM
Company Name: Thermwood Corp
Country: UNITED STATES

Re: Edit Depth not working in Constraint Manager

Post by Clint Buechlein »

Mark McCallum wrote:
If there is a depth constraint, you cannot use Edit Depth.
- If there is no depth constraint, you are not selecting a node, you just need to click on the geometry.
So if there is a constraint already just click on the constraint?
I seem to remember that it worked like Joe described before.?

https://vimeo.com/372189089
Correct, if there is a constraint, you must choose Edit Constraint, and then click the constraint value.

-Clint-
Post Reply