Spoilboard and Wasteboard Matrial

Discuss Thermwood 3-axis Machinery, Controller, and Software.

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Rich Kasten

Bill OConnell
Senior Member
Posts: 121
Joined: Mon, Jun 13 2005, 12:26PM
Location: Calverton, New York
Contact:

Spoilboard and Wasteboard Matrial

Postby Bill OConnell » Fri, Jun 24 2005, 7:37PM

Are the spoilboard and the wasteboard the same material or is one low density fiberboard, the other medium density fiberboard, Rangerboard, etc.? Also most panel suppliers seem to carry 5x10 sheets of 3/4 material but fuew that I have found carry 5x10 sheets of 1/4 material. Does anyone know of suppliers in the NY Metro area?
Woodworking the Way You Want It

User avatar
Jason Susnjara
Thermwood Team
Posts: 1722
Joined: Tue, May 10 2005, 1:26PM
Location: Thermwood
Contact:

Postby Jason Susnjara » Mon, Jun 27 2005, 9:31AM

Hi Bill,

The spoilboard that comes with the machine is 32 lb density and the wasteboard is 48 lb density. If you are not machining 5 x 10 sheets, you can use a 4 x 8 wasteboard. I belive that we have to machine both the spoilboards and the wasteboards here to the correct dimensions because we order it oversize. Hope this helps.


Return to “Thermwood 3-Axis Machinery”

Who is online

Users browsing this forum: No registered users and 2 guests