Hinges not showing up
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Junior Member
- Posts: 77
- Joined: Mon, Jan 11 2010, 11:49PM
- Company Name: Nienow Woodwork
- Location: Pewaukee, WI
Hinges not showing up
Just started a new design in V6B3 and when I add doors to a cabinet the default hinges don't show up in th cost sheet, they appear in the cabinet buy list but as a quantity of zero. If you manually add the hinges & update quantities they then come into play, seems the should be there when you add a door instead of going through another step, always used to do it that way.
-
- Thermwood Team
- Posts: 857
- Joined: Tue, May 17 2005, 12:47PM
- Company Name: Thermwood
- Country: UNITED STATES
- Location: Thermwood
Re: Hinges not showing up
Can you give some steps on what you are doing?
ex.
load std base frameless
go to door/drawer editor
add default hinge and hinge pattern in Item Window
add hinged door
go back to main
click on cabinet buy list
click on cost list
ex.
load std base frameless
go to door/drawer editor
add default hinge and hinge pattern in Item Window
add hinged door
go back to main
click on cabinet buy list
click on cost list
Rick Deskins
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
-
- Junior Member
- Posts: 77
- Joined: Thu, May 19 2005, 11:24PM
Re: Hinges not showing up
I am having the same issue. Drawer glides show up, but the hinges are shown w/quantity of zero.
Jon
Jon
-
- Thermwood Team
- Posts: 857
- Joined: Tue, May 17 2005, 12:47PM
- Company Name: Thermwood
- Country: UNITED STATES
- Location: Thermwood
Re: Hinges not showing up
Gives some steps or post a cabinet file please.
Rick Deskins
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
eCabinet Systems Programmer
Dell Precision / Xeon E3-1240 / 8GB RAM/ AMD FirePro V4900
-
- Junior Member
- Posts: 77
- Joined: Mon, Jan 11 2010, 11:49PM
- Company Name: Nienow Woodwork
- Location: Pewaukee, WI
Re: Hinges not showing up
Attached is a cabinet that this problem occurs on, I take any cabinet, one I have already created or a standard cabinet, go to door/draw editor, set a default hinge, add door(s), check cabinet buy list, hinges show up as 0, in cost sheet hinges are non-existant, slides & mounts show up.
- Attachments
-
- Base 2 door 1 draw fin 2 sides.hsf
- (336.02 KiB) Downloaded 325 times
-
- New Member
- Posts: 19
- Joined: Tue, May 09 2006, 1:43AM
- Company Name: Calvert Custom Cabinetry
- Location: Hale, MO
- Contact:
Re: Hinges not showing up
I had this problem but after I selected a hole pattern the hinges showed up on the cost sheet.
-
- Wizard Member
- Posts: 4723
- Joined: Mon, May 09 2005, 7:33PM
- Company Name: Double E Cabinets
- Country: UNITED STATES
- Location: Amarillo, TX
Re: Hinges not showing up
Rick,
As a side note, this is another cabinet that I am unable to open. There is one hardware item that diesn't have a hardware type listed and I cannot add the hardware or remove it from the cabinet..
As a side note, this is another cabinet that I am unable to open. There is one hardware item that diesn't have a hardware type listed and I cannot add the hardware or remove it from the cabinet..
-
- Thermwood Team
- Posts: 586
- Joined: Tue, Jul 14 2009, 11:05AM
- Company Name: Thermwood Corporation
- Country: UNITED STATES
- Location: Thermwood
- Contact:
Re: Hinges not showing up
Tom,
It appears as there is an issue with getting hinges to add to doors. I will get this addressed in the next build.
I was able to find a work around for now. Simply add any hinge pattern and the hinges will be automatically added to the cabinet as expected. Of course, if you plan to take the to a machine, you will want to use the correct pattern for this.
Thanks for posting.
It appears as there is an issue with getting hinges to add to doors. I will get this addressed in the next build.
I was able to find a work around for now. Simply add any hinge pattern and the hinges will be automatically added to the cabinet as expected. Of course, if you plan to take the to a machine, you will want to use the correct pattern for this.
Thanks for posting.
Ryan Callahan
Thermwood
Dell Precision T3400 / Core 2 Quad Q9400 / 2.4GHz / 8GB RAM / 256MB NVIDIA Quadro FX3450 / Windows 7 x64
Thermwood
Dell Precision T3400 / Core 2 Quad Q9400 / 2.4GHz / 8GB RAM / 256MB NVIDIA Quadro FX3450 / Windows 7 x64