Profiled Part Sizes
Moderators: Jason Susnjara, Clint Buechlein
-
Troy Hollinshead
- Junior Member
- Posts: 58
- Joined: Wed, Apr 30 2014, 4:13PM
- Company Name: Leidys Custom Woodworking
- Country: UNITED STATES
- Location: Mercersburg, Pennsylvania
- Contact:
Profiled Part Sizes
New to using ecabinets shape manager. I have made a 12.5 wide piece, but it cuts at rite around 12.1875 not the 12.5 its supposed to be. I set the depth of the bit to -.75 and mic'd the material at .78 I have included the tool file I made and the assembly. any help would be great.
- Attachments
-
- Tool_and_Assembly.zip
- (37.88 KiB) Downloaded 1085 times
-
-
Troy Hollinshead
- Junior Member
- Posts: 58
- Joined: Wed, Apr 30 2014, 4:13PM
- Company Name: Leidys Custom Woodworking
- Country: UNITED STATES
- Location: Mercersburg, Pennsylvania
- Contact:
Re: Profiled Part Sizes
I was just looking back thru my post and noticed this one and figured I post again.
If I remember correctly............
I fixed this error in the profile modeler, by changing the bit from spherical to straight.
If I remember correctly............
I fixed this error in the profile modeler, by changing the bit from spherical to straight.