Curved top of cabinet

Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal

tim lucas
Guru Member
Posts: 252
Joined: Thu, Nov 29 2007, 5:18PM
Company Name: Tim Lucas Custom Woodworks LLC
Country: UNITED STATES
Location: bell, florida
Contact:

Curved top of cabinet

Postby tim lucas » Fri, Feb 20 2015, 8:22AM

Need a little help, Would like to know how you would go about drawing the top of the upper cabinet in this picture.
Mark Thompson bathroom.png

I am currently using a 8" wide top rail and cutting it to match the curved area, but would like to know any other ideas
W2430.jpg
W2430.jpg (13 KiB) Viewed 1778 times

Thanks for any help
Tim
HP Desktop
i5 2400 @ 3.10 GHz
8.0 G Ram
Win 7 Pro
Nvidia Quadro NVS 290

Blessed is the man who finds wisdom,
the man who gains understanding.

tim lucas
Guru Member
Posts: 252
Joined: Thu, Nov 29 2007, 5:18PM
Company Name: Tim Lucas Custom Woodworks LLC
Country: UNITED STATES
Location: bell, florida
Contact:

Re: Curved top of cabinet

Postby tim lucas » Wed, Mar 04 2015, 8:31AM

Still working on my cabinet, using part editor on a display board, I am having a problem creating a part using closed contour
Capture.PNG

Capture2.PNG
HP Desktop
i5 2400 @ 3.10 GHz
8.0 G Ram
Win 7 Pro
Nvidia Quadro NVS 290

Blessed is the man who finds wisdom,
the man who gains understanding.

User avatar
Scott G Vaal
Thermwood Team
Posts: 1741
Joined: Tue, May 17 2005, 12:44PM
Company Name: Thermwood Corporation
Location: Thermwood Corp: Dale, Indiana
Contact:

Re: Curved top of cabinet

Postby Scott G Vaal » Wed, Mar 04 2015, 9:00AM

tim lucas wrote:Still working on my cabinet, using part editor on a display board, I am having a problem creating a part using closed contour
Capture.PNG

Capture2.PNG


Tim,
If you attach the cabinet with your geometry saved in it, I will be glad to investigate.
Regards,

Scott Vaal
-Thermwood/eCabinet Systems-
Dell Precision / Xeon E3-1240 / 8GB RAM /NVIDIA Quadro K2000

tim lucas
Guru Member
Posts: 252
Joined: Thu, Nov 29 2007, 5:18PM
Company Name: Tim Lucas Custom Woodworks LLC
Country: UNITED STATES
Location: bell, florida
Contact:

Re: Curved top of cabinet

Postby tim lucas » Wed, Mar 04 2015, 12:00PM

well .... , I went back in to the cabinet and now can't reproduce it, works like it should :D
I must have done something to the board prior that created the error.
Thanks
Tim
HP Desktop
i5 2400 @ 3.10 GHz
8.0 G Ram
Win 7 Pro
Nvidia Quadro NVS 290

Blessed is the man who finds wisdom,
the man who gains understanding.

User avatar
George Davidson
eCabinets Beta Tester
Posts: 1585
Joined: Tue, May 17 2005, 1:16PM
Location: Norwood Pa.

Re: Curved top of cabinet

Postby George Davidson » Tue, Mar 31 2015, 9:44PM

Test It should have a Cabinet in a Zip ?? :!:
Attachments
New folder.zip
(4.91 KiB) Downloaded 53 times

User avatar
George Davidson
eCabinets Beta Tester
Posts: 1585
Joined: Tue, May 17 2005, 1:16PM
Location: Norwood Pa.

Re: Curved top of cabinet

Postby George Davidson » Tue, Mar 31 2015, 10:08PM

Here it is
Attachments
Shot1.jpg

User avatar
George Davidson
eCabinets Beta Tester
Posts: 1585
Joined: Tue, May 17 2005, 1:16PM
Location: Norwood Pa.

Re: Curved top of cabinet

Postby George Davidson » Tue, Mar 31 2015, 10:27PM

xx
Attachments
Untitled 6.stl
(220.39 KiB) Downloaded 54 times
1111.jpg


Return to “eCabinet Systems Software”

Who is online

Users browsing this forum: No registered users and 7 guests