Edge Banding
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
Dylan K Kinch
- New Member
- Posts: 14
- Joined: Mon, Apr 03 2006, 10:01AM
- Location: Ontario
- Contact:
Edge Banding
I am having an issue with another user from quite a few posts ago. In version 5.0 I created edgebanding at a 0 thickness just to show the guys on the edgebander where to edge and to calculate the linear feet needed and to charge for. If we create a thickness to this tape it reduces the depth of all the gables, decks, tops and shelves. Is there a way to still allow for our 0\" thickness tape so it shows up on the stickers on the CNC as well as on our Cut List???
-
Todd Miller
Re: Edge Banding
Dylan,
You could set your banding thickness to .0001. This would be a small enough value so the panels would still be close to the correct size, plus the edge banding would still show up on the cutlist and the labels.
You could set your banding thickness to .0001. This would be a small enough value so the panels would still be close to the correct size, plus the edge banding would still show up on the cutlist and the labels.