Does anyone know if it is possible to place a stretcher in a specific position? Specifically moving a stretcher to the front of a panel like a shelf, but only 5" deep.
In our construction process, we place a stretcher in between each drawer. The stretchers we use are 5" deep and we attach them, like a shelf, in order to hide the gap in between drawer faces.
Does anyone have any ideas?
Thanks,
John
Placing Stretchers
Moderators: Jason Susnjara, Larry Epplin, Clint Buechlein, Scott G Vaal
-
- Guru Member
- Posts: 645
- Joined: Mon, Nov 20 2006, 3:39PM
- Company Name: Rylex Custom Cabinetry-Close
- Country: UNITED STATES
- Location: Pine Island, New York
- Contact:
-
- Senior Member
- Posts: 103
- Joined: Wed, Jan 10 2007, 9:53PM
- Company Name: Grali inc.
- Location: lilburn,ga
- Contact:
Re: Placing Stretchers
you can move the stretcher anywhere you want with the edit stretcher button. But for some reason it won't see the openings as different sections? I have been using a fixed shelf offset from the back of the cab to give the desired depth.
Grali inc. / Greg Youngken
grali.com
grali.com
-
- Guru Member
- Posts: 645
- Joined: Mon, Nov 20 2006, 3:39PM
- Company Name: Rylex Custom Cabinetry-Close
- Country: UNITED STATES
- Location: Pine Island, New York
- Contact:
Re: Placing Stretchers
Greg,
Thanks!
I realized after I posted how I could move the stretcher, and also that it wouldn't recognize the opening.
Thanks for pointing out insetting the back of the shelf. That works great!
John
Thanks!
I realized after I posted how I could move the stretcher, and also that it wouldn't recognize the opening.
Thanks for pointing out insetting the back of the shelf. That works great!
John