THM VERSION:  7.0.4.6
SDB FILE:  5AXIS1PPIO2MS.SDB
CONFIGURED AXES:  3
CONFIGURED SPINDLE:  1
CO-PROCESSOR: NONE: PROFIBUS SYSTEM
BYTES FREE: 2603302912
MACHINE TYPE: NO TYPE IN MSU code 0
MACHINE NAME: CS45-083
ALERT: 


System
	Card
		CardType: ISOPDB
		Status: NORMAL
		Port 0
			Outputs Enabled: YES
			Node 10
				Device ID: Siemens PPIO
				Status: DEVICE_STATION_FAILURE_OK
				Error: 0
				Chan 0
					Type: PPIO
					Outputs 1-8: 0x00
					Outputs 9-16: 0x00
					Outputs 17-24: 0x10
					Outputs 25-32: 0x00
					Outputs 33-40: 0x00
					Outputs 41-48: 0xC0
					Inputs 1-8: 0x96
					Inputs 9-16: 0x04
					Inputs 17-24: 0x09
					Inputs 25-32: 0x00
					Inputs 33-40: 0x00
					Inputs 41-48: 0x00
					Inputs 49-56: 0x00
					Inputs 57-64: 0x00
					Inputs 65-72: 0xB0
			Node 11
				Device ID: Siemens 611U
				Status: DEVICE_STATION_FAILURE_OK
				Error: 0
				Chan 0
					Type: 611U AXIS
					1st Control Word (STW1): 0x247F
					Speed Command (NSOLL_B): 0x00000456
					2nd Control Word (STW2): 0xB008
					Encoder Control Word (G1_STW): 0x0000
					Analog Output 1 (DAC1): 0
					Analog Output 2 (DAC2): 0
					Digital Outputs (DIG_OUT): 0
					1st Status Word (ZSW1): 0x0337 = RDY_FOR_POWER, POWER_ON, PULSES_ENABLED, DRIVE_READY, UNCLAMPED, AT_SPEED, NC_CTL_ACTIVE, ENABLED, READY_TO_RUN
					2nd Status Word (ZSW2): 0x2018 = SETPOINT_FILTER_OFF, RAMP_FUNC_GEN_OFF
					Speed Actual (NIST_B): 0xFFFFB600
					Encoder Status Word (G1_ZSW): 0x0000 = OK
					Encoder Count Actual (G1_XIST1): 0x000007CF
					Additional Encoder Info (G1_XIST2): 0x00000000
					Analog Input 1 (ADU1): 13647
					Analog Input 2 (ADU2): 0
					Digital Inputs (DIG_IN): 0
				Chan 1
					Type: 611U AXIS
					1st Control Word (STW1): 0x247F
					Speed Command (NSOLL_B): 0x00000378
					2nd Control Word (STW2): 0xB008
					Encoder Control Word (G1_STW): 0x0000
					Analog Output 1 (DAC1): 0
					Analog Output 2 (DAC2): 0
					Digital Outputs (DIG_OUT): 0
					1st Status Word (ZSW1): 0x0337 = RDY_FOR_POWER, POWER_ON, PULSES_ENABLED, DRIVE_READY, UNCLAMPED, AT_SPEED, NC_CTL_ACTIVE, ENABLED, READY_TO_RUN
					2nd Status Word (ZSW2): 0x2018 = SETPOINT_FILTER_OFF, RAMP_FUNC_GEN_OFF
					Speed Actual (NIST_B): 0x00000000
					Encoder Status Word (G1_ZSW): 0x0000 = OK
					Encoder Count Actual (G1_XIST1): 0x0000B09B
					Additional Encoder Info (G1_XIST2): 0x00000000
					Analog Input 1 (ADU1): 7
					Analog Input 2 (ADU2): 3
					Digital Inputs (DIG_IN): 0
			Node 12
				Device ID: Siemens 611U
				Status: DEVICE_STATION_FAILURE_OK
				Error: 0
				Chan 0
					Type: 611U AXIS
					1st Control Word (STW1): 0x247F
					Speed Command (NSOLL_B): 0x0000029A
					2nd Control Word (STW2): 0xB008
					Encoder Control Word (G1_STW): 0x0000
					Analog Output 1 (DAC1): 0
					Analog Output 2 (DAC2): 0
					Digital Outputs (DIG_OUT): 0
					1st Status Word (ZSW1): 0x0337 = RDY_FOR_POWER, POWER_ON, PULSES_ENABLED, DRIVE_READY, UNCLAMPED, AT_SPEED, NC_CTL_ACTIVE, ENABLED, READY_TO_RUN
					2nd Status Word (ZSW2): 0xC018 = SETPOINT_FILTER_OFF, RAMP_FUNC_GEN_OFF
					Speed Actual (NIST_B): 0xFFFFAF00
					Encoder Status Word (G1_ZSW): 0x0000 = OK
					Encoder Count Actual (G1_XIST1): 0xFFFFDDCC
					Additional Encoder Info (G1_XIST2): 0x00000000
					Analog Input 1 (ADU1): -2
					Analog Input 2 (ADU2): 1
					Digital Inputs (DIG_IN): 0
				Chan 1
					Type: 611U AXIS
					1st Control Word (STW1): 0x247F
					Speed Command (NSOLL_B): 0x000002DF
					2nd Control Word (STW2): 0xB008
					Encoder Control Word (G1_STW): 0x0000
					Analog Output 1 (DAC1): 0
					Analog Output 2 (DAC2): 0
					Digital Outputs (DIG_OUT): 0
					1st Status Word (ZSW1): 0x0337 = RDY_FOR_POWER, POWER_ON, PULSES_ENABLED, DRIVE_READY, UNCLAMPED, AT_SPEED, NC_CTL_ACTIVE, ENABLED, READY_TO_RUN
					2nd Status Word (ZSW2): 0xC038 = SETPOINT_FILTER_OFF, RAMP_FUNC_GEN_OFF, HOLDING_BRAKE_OPEN
					Speed Actual (NIST_B): 0xFFFFDB00
					Encoder Status Word (G1_ZSW): 0x0000 = OK
					Encoder Count Actual (G1_XIST1): 0xFFFFFFC5
					Additional Encoder Info (G1_XIST2): 0x00000000
					Analog Input 1 (ADU1): 1
					Analog Input 2 (ADU2): 4
					Digital Inputs (DIG_IN): 0
			Node 13
				Device ID: Siemens 611U
				Status: DEVICE_STATION_FAILURE_OK
				Error: 0
				Chan 0
					Type: 611U AXIS
					1st Control Word (STW1): 0x247F
					Speed Command (NSOLL_B): 0x00000000
					2nd Control Word (STW2): 0xB008
					Encoder Control Word (G1_STW): 0x0000
					Analog Output 1 (DAC1): 0
					Analog Output 2 (DAC2): 0
					Digital Outputs (DIG_OUT): 0
					1st Status Word (ZSW1): 0x0331 = RDY_FOR_POWER, DRIVE_READY, UNCLAMPED, AT_SPEED, NC_CTL_ACTIVE, ENABLED
					2nd Status Word (ZSW2): 0xC018 = SETPOINT_FILTER_OFF, RAMP_FUNC_GEN_OFF
					Speed Actual (NIST_B): 0x00000000
					Encoder Status Word (G1_ZSW): 0x0000 = OK
					Encoder Count Actual (G1_XIST1): 0x00000000
					Additional Encoder Info (G1_XIST2): 0x00000000
					Analog Input 1 (ADU1): 3
					Analog Input 2 (ADU2): 3
					Digital Inputs (DIG_IN): 0
		Port 1
			Outputs Enabled: NO