++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Directions for making and using the install disk for the
Block Text Machining program:

1.) Insert a blank floppy into your A: drive.
2.) Double click on the file FLOPPY01.BAT.
3.) Follow directions on the screen.

To use the install disk at the machine:

1.) From the Thermwood main screen, shell out to the OS/2 full screen by
pressing the Ctrl + Esc keys at the same time and then selecting OS/2 full
screen from the list. Then press enter.
2.) Make sure the install disk is in the floppy drive.
3.) Type in A:INSTALL, then press enter.
4.) Follow instructions on the screen.
5.) When finished return to the Thermwood screen by pressing
the Ctrl + Esc keys at the same time and then selecting THM.EXE from
the list. Then press enter.

Installation should now be complete.

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

View the file: BLK-LTRS.PDF for an explaination of how to use and
setup the program.

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
